Counting matching models…
Replica of the main character's helmet from the video game Satisfactory. Comes in two size variations. The “large” version is for a 23" circumference head and the “small” version is for a 22" circumference head. Both sizes are designed to…
A cute little model of our favorite game mascot - the lizard doggo😍 The stl file is so large bcs it's a very detailed model and i was too lazy to do anything about it xD Oh and be careful when removing supports I broke both of the doggo's…
SFAv2 is HERE!! If you have this version currently I highly suggest making the v2 clips and end stops! Getting in to 3 gun and other competitive shotgun shooting sports is expensive. After the heart attack inducing prices i have seen of…
Scaled models of buildings from the game Satisfactory. With optional holes for 6x3mm magnets ( here are the magnets I used). You can use them with a whiteboard for a more tedious but tactile factory planning experience! Fun to look at,…
This model prints in 24 different pieces with 19 different files. I'm continuing to tweak the model for increased quality and reduced support so expect updates soon. A lot of the pieces snap together or screw in, but some pieces do…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems May fit others with 1.5" hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts, if you…
Version 2 of my original Shell Caddy Designed for ELS and Tek-Lok mounting systems. May fit others with 1.5" mounting hole pitch 10° grab angle on the shell groups Added mounting options and configurations New parts work with old mounts,…
Update 2023/12/01: Added a step file with the two portions of the coupon separated out as well as a DXF of the sketch to aid with customization. You've spent more hours than you care to think about routing endless items into the Awesome…
Simple storage box for the slack of a fiber-optic cable. The box ensures safe storage so that the cable does not fall below the typical minimum bending radius. There are different sizes available. Each box is 9x9 cm large. Only the depth…
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
This is the train cart from the game satisfactory, we do sell the train models and others on our Esty store but the carts and tracks are free here, any question feel free to ask or suggestions. Etsy Link to Train:…
Every single part extracted from the game files. Processed and slightly modified to be more slicer friendly.
A from-the-ground-up model of the Build Gun from the game Satisfactory by Coffee Stain Studios. Has absolutely zero assets from the game files, and in fact is quite different. However, my version is printable, as well as possible to…
These are spare parts for the TwoTrees SK1. The Backshroud got hexagonal cutout instead of the original “doted lines”. Backshroud and the Fanshroud got several cutouts so, that you don't need to remove the filament, the tensionknob, the…
E: my design has been completely superseded by Bill and Britt from GizmoThrill (punished props academy)'s version here: https://www.printables.com/model/707053-satisfactory-helmet-cosplay-replica-2-sizes I wholly endorse theirs as an…
DISCLAIMER: The original model was made for the game Satisfactory (I highly recommend btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
Love the game and have always wanted my own “Cool S” I ripped the model directly from the game, and removed .1mm from one side to make it flat and printable at the current orientation. Add supports on the single overhang and everything…
Some users on Reddit requested a FICSIT logo keychain, so i made one in Fusion 360 by tracing over a picture. The layers are made to match a 0.2mm layer height, or a number you can divide it by (0.1mm, 0.05mm) Print instructions Category:…
Was created as a Christmas gift for Reddit Moderator Temporal_Illusion (aka my Dad) Two base options included, only need to print one. Option one, no support but will need to glue the feet on Option two, with supports (I used tree Auto,…
SFA Shell Caddy for loading Doubles in competitive shotgun shooting. Update 12292023 - Added the end stop stl file… This utilizes a single back plate design and alignment tabs on the clips for easy setup and adjustability. 12 mounting…
I modified the nut on top to have more details. Have fun printing Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 10% Filament: . PLA Gold, Woodfill Category: Games
I designed this simple part to help calibrate the cross fader on the DDJ-1000 controller. Using the service guide this will help to put the crossfader into the three positions needed for calibration. You can see the video at
Satisfactory the video game turned into one of my favorite games over the past several years and I decided I wanted to make a replica of something from the game. I figured the Build Tool would be neat to model and print. I think I started…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
This remix is designed for the Creality CR-10 V2 . 7/30/2020: Mount V3 - I lowered the hotend 2 mm to to allow for the bed springs to be a bit more compressed. This should keep your bed level adjustments in tact better and keep the level…
Don't print the top on top of the bottom... Print with supports. Maybe tree?
Material: 215 g PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 40 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / Support Tree Kein zusätzliches Material erforderlich / no additional material required Für den Scharnierbolzen habe ich…
A conveyor belt styled shelf to help keep your factory tidy. Print and Build Instructions This shelf is designed to be built using the included printed fasteners without any extra hardware or glue, but can be glued for more strength. Hot…
Hardware: M3*20 Hex socket machine screw: 4 M3 nut: 4 4mm diameter, 2mm height magnet: 4 Assembly: Prepare all parts. PLA is fine for all parts, but i suggest PETG for the "slider latch" which has flexing pins. Print with 4+ walls and 30%…
Pioneer S9 crossfader external fader cap stopper by Flavour G'z Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.1 Infill: 100
Hello. Here a short description, how I put all the parts together. In the model is space for a small atomizer-chip, wich produces smoke out of the chimney. It's called: 517C 5V Atomizer Board Driver USB. There is no soldering needed. I…
The source marked this model as adult content.
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Lock the fader in place if you don't need it, and entirely remove the risk of accidentally causing chaos. Tested on a DJM-S7 only. It should fit other mixers of the DJM range as well. Fader slot width: 55mm Fader knob width: 12mm
As base for the Hydroponic Tower, I bought a 20 L wide-mouth barrel / sauerkraut barrel (20 L width: Ø 28 cm, height: 38 cm, opening: Ø 14 cm). So that the original lid does not have to be cutted in order to glue the adapter in, I…
colored model for multicolor printing I used kexelled pla orange, silver and black.
I made the base a bit taller to make room for magnets (you'll need two 8x3mm) and sized it to 100mm wide as a part of my 'wall of shame' tribute series to games I've spent too much time in. Did a color swap between the base and the…
Replacement sights for the USFA ZIP-22. Recommend putting paint in the holes for the front and rear sight posts. To install: loosen the two bolts up top and slide into place. Tighten the bolts and it should be a snug pressure fit. My…
[DEPRECATED] Reason: Lamarc (Layer.Shifted) already added screws, maintaining and adapting such a big amount of objects is too taxing. Assembly guide: Youtube BOM: 6 * M3 heat inserts (8 if you use the bambu variant) 3 * M3 * 8mm Tapered…
DISCLAIMER: The original model was made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm really…
I know Petsfang ducts work well and I wanted a good 5015 fan duct for my Ender 6 but the design I found on MakerForum made by Makermike wouldn’t clear the cable chain mount I installed. After a bit of tinkering I found if I reduced the…
Created these bases for my Voxelab Aquila. This consisted of extending the left side of the base and adjusting the location of the screw hole to fit on the Aquila. Did this for the Blokhead / Bullseye base as well as the v2 Petsfang base.…
Printable mesh screens with two patterns I printed mine from ASA and then acetone vapor polished them so they look nice and shiny. Antenna Printed standing up from PETG because it can be bended a little. Enable arachne wall generator for…
One thing regarding supports; don't feel the need to go all the way in. K series is a monster when it comes to defy god with overhangs, see 4th picture for how I distributed my supports. Use support blockers. This model is a great test…
Material: 325 g PLA+ Druckereinstellung: Layerhöhe 0,2 / Infill 40 % honeycomb / Wände 3 / Schichten 5 oben, 5 unten / Support Tree Kein zusätzliches Material erforderlich / no additional material required Für den Scharnierbolzen habe ich…
250x150 Schild für die Auffahrt in 2 Versionen Löcher für M3 Schrauben…
Split the handle into two parts to make iut closer to the in-game appearance. Print vertical with brim
You can print the original ear cover out of a clear/transparrent LED or use a laser cutter to make a 64mm acrylic ring to shine through. I used black LED acrylic in mine Later I will provide schematics and code for microcontroller based…
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
Music tape from Satisfactory. The cog wheel/gear might be a bit too small, need to fix this in future versions... 😅
The FICSIT Personal Safety Tool is here! Please check out the trailer for the FICSIT Personal Safety Tool, it outlines the final product beautifully and demonstrates all its features Cheers to Swae'J Studios for putting the video…
Gedruckt in TPU Um so langsamer um so besser
The files include the following: Ficsite Trigon Full - one piece print this 3 times to make the complete Ficsite Trigon Ficsite Trigon Full - zero tolerance the same as above but divided into 3 parts. For multicolor prints. Ficsite Trigon…
Scale the original coupon to your desired X and Y dimensions, the scale the Z to 1.8mm to fit this stand.
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
A quick trace of an image I found online, with some added 3D aspects of my own.
I tried hydroponics last year and failed miserably :D This year I give it a second try. I bought one of those widemouth barrels as a base for the tower. There is already one lid available here for those barrels, but the one I bought has a…
Remixed the original with an offset for the Petsfang mount. The front has a smaller offset than the back based on the duct I have installed so I made 2 files. I also hollowed out the center cone to save a little weight/plastic and notched…
Hello! This is the first time Ive modified/created anything. I hope this helps someone. Its a modified Bullseye base to fit a Creality Spider 4.0 hotend to a CR10/Ender. Its much wider and taller than the MK8 hotend and the wiring coming…
Rane TTM ve Sixty Serisi Fader Taşıyıcı (raylar üzerinde kayan) plastik olduğu için kırılan parçanın metal ve plastik versiyonları ve küçük bir kaydırıcısı var.
Crossfader lock for the ALLEN & HEATH XONE:23 to prevent accidental moves and ensure stable control during live performance, likely fitting other XONE mixers as well. Printed with MK 3.5S
Remix of: https://www.thingiverse.com/thing:4771559 Original design: http://www.dpetsel.com/files2print.html
My first remix of the right probe mount for the petsfang base Mount did not fit the CR Touch well so I made some modifications to allow clearance of the ribbon cable, and removed the middle hole as it was useless 1/2/22: Realized that the…
3mf Datei mit Verbindungsbolzen damit es auf einmal gedruckt werden kann als 2 Stücke.
Praktischer Verbinder für Maker Beam, Kanthölzer und Rohre. Für SLS-Druck optimiert.
DISCLAIMER: The original models were made for the game Satisfactory (I highly recomand btw), from coffee stain studios. I do not make any money in anyway of of these models, and it takes me many hours to “convert” each models. So I'm…
Do you like the Satisfactory Game? Do you want to decorate your desk or your wall? This Light box of the Satisfactory game Logo is perfect to add some decoration to your room. This was printed with a multi-color printer using white,…
for the petsfang bl touch mount, I found that the bl touch couldn't reach the build plate even at its lowest setting. so what i did is completely redesign it so that it would firstly go a bit further down than the old design, but also if…
for all other information refer to original models. all credit and a big thank you to CadeyzDad
Because why not, it's satisfying factory. Printing: PETG Supports for the logo so you have cleaner glue surfaces. Print two pins 3 walls, 4 top and bottom layers, 15% infill Make filament change for letters Glue all pieces together,…
Petsfang is a high quality fan duct for Creality CR10s and other printers : https://www.thingiverse.com/thing:2759439 I wanted to mod my CR10-V2 but had to remix the adapter plate to fit screw and pins locations on the machined carrier of…
Introduction: This is a Satisfactory-inspired coaster set stored inside a DNA capsule-style dispenser. The capsule holds the coasters inside and lets you easily pull them out when needed, making it both a functional desk accessory and a…
Telekom Glasfaser Modem 2. I measured the mount and modeled it based off of the wall mount that comes with the modem. There is also a model with a flat bottom. If you print it it should fit fine. Just be careful with the little tabs for…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized figure inspired by the Pioneer from…
Print at 0.8mm layer height Start with Black, swap to orange at layer 11, swap to white at layer 20. Should be 27 layers total. 100% infill!
Even though you can disable the Z1 Mk2's crossfader functionality in Traktor, you may want something to hold it in the center, like I did.
New lid for 20 L Barrel with opening Diameter 14 cm. Total top diameter 15.5 cm (polished)
I liked zeegoo's fan cover for the ender 3 control board and decided to mix it. As i could not find a cover for the petsfang 5015 fan mount I used two of zeegoo's covers and mixed them to work vertical to allow for cooler air to be…
Now, you too can zap all those xenos getting the way of expanding your factory! Continuing on my obsession with Satisfactory and wanting to make more replicas from the game, I decided to try my hand at modelling my own version of the Xeno…
Der zusammenbau ergibt sich von selbst, alles bis auf das Mittelteil muss doppelt gedruckt werden.
Printed with PLA on a Creality Hi @0.2mm layer height.
This is an Ender 5 Pro X-axis Carriage for Petsang Cooler
It's a redesign of the CR10_E3DV6_MANUAL_BASE_V7.5.stl part from petsfang v2 ( https://www.thingiverse.com/thing:2759439 ) This new part fit the specific Funssor CR10(-S)/Ender replacement carriage available on aliexpress here…
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
I wanted to try the petsfang duct but there wasn't a mount for the ender 5 with an E3Dv6 hotend at the time, so I modified the CR10 base to fit.
This is An award for Satisfaction The Rolling Stones sang, “I can't get no… Satisfaction” but, If you try sometime you'll get what you need” Well, Here it is… the Satisfaction Award or the big Sucker Award! Three colors needed.. Black…
Das Gitter kann durch den Einbau nicht mehr durch Gegendrücken aus dem Rahmen gedrückt werden. Die Benennung verrät euch für welche Rahmenbreite und welchen Tellerdurchmesser es passt. Wenn eure Maße abweichen, meldet euch gerne, dann…
Blade Runners - Satisfactory Figurine STL is a video game character figurine 3d model for collectors who want to print and display a Blade Runners style statue from the Satisfactory universe. Use it for desk and shelf display, tabletop…
Couldn't find an adapter for a Petsfang duct to install on my friends Tevo Tarantula, so I made one. Haven't installed yet, but it should work fine. You can download the other parts for it here, https://www.thingiverse.com/thing:2759439 .…
Winkelstück für Glasfaser Leerrohr D_außen= 7mm
I took inspiration from v_rod_fer's version and made it from scratch, since his STL is way too big and I needed a different diameter (8 mm) for the dial indicator. I adapted it for the new base file (BB_Stk.Base.E3v2.E4.E3_3.11.21.stl)…
This is modded version of Petsfang Bowden Direct with Bondtech BMG for Ender 5. Left mount BLtouch. I cannot use my stock Dual extruder's screws on the original base, so I added more ticker at motor mount so I can use M3 40 mm screws I…
Ist ein Teil in einen Computer Spiel namens Satisfactory
This remix only works with v6 and BLT only. It does not work with EZABL. And I only have a Ender 3 Pro to test it on. This is a remix of Petsfang Bowden Direct with Bondtech BMG hotend mount (works with v6 and BLT only) with the following…
Back part: fully printed with orange plastic Front part: (optional) Print first layer (0.16 mm) with transparent plastic (add pauze in slicer and swap plastic when print pauses) Print remaining model with orange plastic Glue parts…
This is a mount for an endoscope camera in combination with a Petsfang Bullseye on a stock Creality CR-10s. It winds around the petsfang to point the endoscope directly at the nozzle. The mount is supposed to be attached to the left of…
Muzzle cover so you don't get dirt in the barrel. Made with thinner parts on the top and bottom so if you fire with it still on it will splitt into two parts and fly away. Added the STEP if you want to change something.
![Neptune 4/Pro/Plus/Max LSfanmod - Stiff remix [DEPRECATED]](https://media.printables.com/media/prints/950614/images/7254619_51d6a99e-de7d-4342-8511-3d96e74feca8_0bc58c3a-ffd3-419a-a3bd-c5533c221320/f6d601b7-a9ce-4d43-81cf-9e041d32bef9.png)
