1 / 8
NEW GUITAR WALL MOUNT
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New guitar wall mount bracket for guitars and other stringed instruments.
- Rating
- 5 / 5
- Likes
- 488
- Downloads
- 1,481
- Makes
- 4
- Views
- 5,143
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Guitar or Bass Guitar Wall mount
IDEALLY FOR SYMMETRIC GUITAR HEADS (Fender strats etc will fit but you may get a slight tilt due to the headstock geometry not being symmetrical)
hidden Screw Design. Fix bracket to wall then slot mount over
43mm and below necks
- MUST print bracket laying down so layer grain runs the length or bracket
- MUST print the mount standing up. If not, I can not guarantee the strength of the part.
- 0.2 layer height
- Minimum of 3 wall thickness
- 30% triangular infill
- The guitar mount works great in quality PLA, but stronger materials would be beneficial.
- See the image attached for hole dimensions. I used M4 Screw. Approx 40mm in length
- Use suitable wall fixings to avoid failure.
For Ukulele Wall mount