Counting matching models…
Almost out of filament? Print these with the last few fractions of a meter, and in a just a few minutes you can sing the blues. You can also load up a new spool set up a new print, and Rock ON while the new prints proceed! These couple of…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for PETGSource material: PET
Version 2.2 now available Minor errors fixed (see version release notes below). Assembly Guide finished! The assembly guide has now been been completed, containing 38 pages with over 60 diagrams to assist in creating the banjo from start…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
I am working on Version 2, with the shorter neck first. Instead of using a threaded rod inside the neck, I'm now using a vertical aluminum strip (2 x 15mm) glued into the neck, which provides much better stiffness and prevents bending…
Print approx. €0.07–€0.08 excl. taxPreliminary estimate for one variant
As an luthier & printer, I believe the banjo is a perfect instrument for printing since the component that has the biggest effect on tone (the drumhead) is a standard component purchasable at any music store. Printing can even improve on…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
I made this script to generate a bridge for a 3d printable Banjolin that I am designing. The script can be used to make any floating style bridge with3 legs and up to 12 strings. You find this type of bridge on Mandolin and Banjo as well…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Take a measure of the Banjos hooks and print the appropriate one. 3.4 - 4.0 mm. A VERY cheap investment!
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
The picks that I found in the local music stores were unconfortable for me so I decided to plan my own ergonomic design. I optimized it for 3d printers -printing position is important for a good result. After you place it to the slicer do…
Heavy Duty Ukulele or Banjo Instrument Wall mount hidden Screw Design. Fix bracket to wall then slot mount over - MUST print bracket laying down so layer grain runs the length or bracket MUST print the mount standing up. If not, I can not…
Here is a scale miniature model of a 4 string 17 fret banjo. I made my example on the Anycubic Photon resin printer. If you print it on a filament printer, you might need to scale it up to get all the detail. It's about 2.5 inches long as…
A yordle scaled prop replica of Heimerdingers Banjo from the alternate universe that he and Ekko visit. All parts fit on my Mk3S build plate. Go spin the wheel and see where it lands. Glue the DrumGear into the Drum's soundhole. Assemble…
I recently purchased a Craftsman 109 lathe off of Craigslist. Unfortunately, not all of the gears were present. After a LOT of hunting, I finally found all of the information I needed to create DXFs for the gears at…
This Armrest is designed for the Golden Tone AC1, if it were to fit on any other banjo it would be purely by coincidence. The model can be printed without support and works in PLA. The clip is pretty tight though, so a more flexible…
The main part and the knob should be printed using PLA. The TPU string insert has two options a thicker and thinner one to choose which is more comfortable. It gets in the way slightly but its a way to capo without having to drill holes…
Changes/Remix Disclaimer: Neck, Head, parts of the body from: https://www.thingiverse.com/thing:113908 Neck and head: Design rounded up. Body replaced by this original, and adapted for the Neck. The neck will be attached with 4 M4x50…
Banjo Pendant was printed from brown, silver and gold filaments. Neck is printed with two colors with layer 0,15 mm. All other parts are printed with layer 0,2mm single color and they are fixed together with drop of glue.
Sounds Nice. Example here https://www.reddit.com/r/banjo/comments/1opx1v9/comment/nrh1z24/?context=1
To store the dampener, you can loosen the screws and slide the dampener down along the ring.make the banjo more quiet.
Modular String Winder There are a number of good models for a string winder out there, but most of them were for guitar and a little clunky for use on my mandolin. It's a pretty simple design to do a print in place string winder so I just…
A simple mute for reducing overtones and volume on my open back banjo. Print 2 screws and one of the others.
construction should be pretty straight forward needs a bunch of different screws and heat set inserts for everything but the M6 , STEP file included for easy modification and as a guide on how the parts go togeter. Print in petg for best…
If you play the banjo and use a tuner, this design allows you to attach any tuner to the banjo pot instead of to the headstock. It's a lot easier to see the tuner display and the tuner gets a better vibrational signal from the body of the…
I made this feeder for my dad and he loved it. Of course remember to print it in PETG and also to stop the print to put some weight inside. I used these 👇 It won't be very round as i can only export in low quality from Shaper3D.
I created the Banjo Arm Rest for my banjo. Usually it is made from wood but I tried 3D printed version. Two parts are connected together with 3 pegs and can be fixed by some glue.
This is a custom-designed banjo bolt intended for use with ARB Air Locker systems or similar setups. The bolt features 1/8 BSP threads, a cross-hole for fluid or airflow, and a tapered flange that allows an O-ring to seat securely,…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/c0JRQAxM277 Add a little paracord with the inner threads pulled out. Insert the paracord up from the bottom, and push out the sides (if you see what I…
Designed for multi material printers. Help support my design work by visiting my referral links: Upland referral (virtual property trading game): https://r.upland.me/qk9X Unstoppable Domains referral:…
My new banjo uses 7mm nuts to tension the head and I didn't have and couldn't find a deep enough 7mm socket to replace/adjust it so I made this instead. I attached both OrcaSlicer and Bambu Studio project files with pre-configured print…
This bridge is suitable for banjo or some flat-bodied mandolin models. It is better to print with 100% fill. :)
My neighbors leave food outside 24/7 and now the birds have learned this. They land on the fence to recon the area before going in for the food and they poop ALL over the fence and our vegetable plants. With these simple parts and some…
Hillbilly Banjo Gnome Bring a little backwoods charm to your shelf, garden, or desk with this cheerful Hillbilly Banjo Gnome. With his big beard, patched-up outfit, chunky boots, tall hat, and trusty banjo in hand, he looks ready to start…
My neighbors leave food outside 24/7 and now the birds have learned this. They land on the fence to recon the area before going in for the food and they poop ALL over the fence and our vegetable plants. With these simple parts and some…
construction should be pretty straight forward needs a bunch of different screws and heat set inserts for everything but the M6 , STEP file included for easy modification and as a guide on how the parts go togeter. Print in petg for best…
Changes/Remix Disclaimer: Neck, Head, parts of the body from: https://www.thingiverse.com/thing:113908 Neck and head: Design rounded up. Body replaced by this original, and adapted for the Neck. The neck will be attached with 4 M4x50…
My bathroom cupboards were missing a number of shelf supports. At the time I didn't know how to describe them to search for replacements, and it just seemed easier (not to mention more fun) to make a model and print some… It looks like…
You do not need a multicolor printer to make this. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions (add pauses in your slicer at the numbered layers below and swap colors) Start with Black…
You do not need a multicolor printer to make this. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions (add pauses in your slicer at the numbered layers below and swap colors) Start with Black…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions (add pauses in your slicer at the numbered layers below and swap colors) Start with Black At layer #8 (0.72mm) swap to Blue (I used a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Sunlu Black Transmission Distance: 0 PLA Sunlu Gray Transmission Distance: 2.2 PLA Sunlu White Transmission Distance: 7.7 This print uses 3…
I noticed there were almost no Banjo Kazooie models that used original assets for 3d printing. I decided to do it myself! Nintendo dont sue! This model was ripped from the title screen of Banjo Kazooie, save file 3. However, some changes…
Please see the assembly guide, in pdf-format, under Files/Other files See the multiplate .3MF file[s] Some parts are printed with 70% infill Some, not many, parts require supports (See .3MF-file) Hardware required 2 x Screw M4 x 12 mm…
Meet the Banjo Garden Gnome A tiny, bearded folk hero who’s always ready to pick a tune (even if he’s too shy to show his eyes). Few supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort.…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bkmAB47PXj1 Turns a standard socket into a head wrench for your Goodtime banjo. Fits my socket nicely, but YMMV. Category: 3D Printing
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gBOMfMzN89q Print Settings Printer Brand: Monoprice Printer: Maker Select Rafts: No Supports: No Resolution: .1mm Infill: 40% Filament: Monoprice ABS…
Hillbilly Banjo Gnome Bring a little backwoods charm to your shelf, garden, or desk with this cheerful Hillbilly Banjo Gnome. With his big beard, patched-up outfit, chunky boots, tall hat, and trusty banjo in hand, he looks ready to start…
This is version 2. I'll include several models including a blank model that you can use to put your own kind of design on it wether to keep the birds away or to make some silly art to clip on top of your fence post When I get them up and…
This little do-hicky will allow you to attach the tuner part of a Snark tuner to the hooks on your Goodtime banjo. I print it at 50% infill, .20mm, PLA+. This is a remix from: https://www.thingiverse.com/thing:4180336 - I reshaped the…
A sleeve adapter for the banjo of the MidiPro woodturning lathe. It lets you firmly mount a 20 mm diameter shaft in the 25.4 mm bore of the banjo. It is intended for simple accessories like a sanding table, drill guide, or at max a small…
The banjo I'm using has 50mm (2") spacing between the brackets so I designed this after the Stew-Mac bracket. Maybe this is a remix of the other similar designs on here, IDK.. I designed it from scratch in FreeCad 0.18 but looked at the…
While upgrading the tank fittings (aka bulk head fittings) on my rain barrels, I found the larger one required a giant wrench. While I could use an extra large pipe wrench, those tend to mar and/or deform the plastic (polyethylene)…
Wall hanger for banjos or other stringed instruments, customizable to allow different neck widths or headstocks
Lithophane / Vitrail dédié à la jaquette de Banjo_Kazooie sur Nintendo N64! Faites vous plaisir ! This is a lithophane from the cover of Banjo_Kazooie on Nintendo N64, that could be used as a stained glass window. Enjoy ! Print Settings…
I noticed a severe lack of Banjo-Kazooie content on Printables, decided to chip away at it. N64 era Rareware games are my childhood. Saw a similar model was for sale on another website for a cost. I reverse engineered it and now everyone…
Tuner Holder for Banjo consist from two parts connected together with two 3mm screws. It was printed from PETG filament with layer 0,2mm
I saw someone with one of these on their banjo. I wanted one. Looked on here, and there are a couple models that do the same thing, but for banjos that have the hooks much further away than the Gibson style banjos have. Thus, I made this.…
Printed @ 100% infill, seems strong enough but probably wouldn't load with lead weights! Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution: 0.1mm Layer Height Infill: 100% Category:…
Banjo kazooie golden feather or red you decide :) the small pins to fit the eyes to feather are a snug fit just need a little push
