Full print volume upgrade Mk3.5 Integrated BMBox enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.60 – €0.73 net (excluding VAT)
For file: Bandeau_0.4n_0.2mm_PETG_MK3.5_40m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.66 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 39.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Prusa i3 mk3 or mk3.5 -> BMBox upgrade with full print area available, this time, for beter performance and ease of use.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 14
- Makes
- 0
- Views
- 679
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
The goal of this upgarde is to get the full print bed available, completely prevent collision and improve the thermal performance in the most foot print efficient way, to compeat with the materials capability of the Core One. I get easily to 35°C Inside during PETG print. With some warm up time, printing ASA and PC shows minimal warping.
If you already printed the BMBox original mk3 or mk3.5 , the files here are containing the parts to print to do the upgrade. Some parts are reused from the original build.
If you start the journey and still have a naked mk3 or mk3.5, you want to go see the original posts and print the parts from the original version, except the following file:
casquette.3mf (not used anymore in this upgraded version).
New acrylic panels are needed, but you can cut some of the previous ones to respect the new dimensions. This is the case for the 3 panels of the removable front housing which is now shorter.
1× Plexiglas 3 mm ( 4cm x 25.7cm)
1× Plexiglas 3 mm ( 8.2cm x 30.9cm)
1× Plexiglas 3 mm ( 11.7cm x 30.9cm)
2× Plexiglas 3 mm ( 16cm x 31.1cm)
1× Plexiglas 3 mm ( 15.5cm x 25.5cm)
1× Plexiglas 3 mm ( 5.7cm x 30.9cm)
3 additional M4x15mm screws.
I will make proper guidelines in the next days to make the build easy.