1 / 1
Metric Cable Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some metric cable clamps for automotive projects to hold cables/wires/conduit in place
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Some cable clamps I made for a restoration project on a car, they use an M7 bolt to mount, all numbers of the files are the corresponding size in metric mm
Steps are in 1mm increments so you can get a nice snug fit.
You might find you have 22mm conduit, but 22mm is still a bit loose, 21mm is a bit better, but 20mm may be perfect.
But you may have 22mm conduit, but not much in it yet, and a 17mm one might be best to get enough clamp load.
Set your slicer to metric before importing models