DODGE UCONNECT Battery door/cover fix.
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: uConnect_Battery_Cover 7.6 _0.2mm_PLA_I3MEGAS_28m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 27.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement battery cover for Uconnect Headphones. Reuses metal battery contact plate.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 81
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
DODGE UConnect headphones battery door replacement model, made to fit like the original one and reuse the metal contact plate.
You will need to carefully remove the original contact plate, reinstall on the new door and melt the plastic pins to retain in place.
Tried to make the best possible fit, but stil has some gaps. Works well anyways. Printed with PLA and made thicker than the original thing, seems more rigid, but could be printed with PETG for extra rigidity. You would although have to re slice because temps are set for normal/ common PLA.