LCD Wiring Cover for Prusa MK3/MK4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model provides protection to the underside of the screen and cabling for the Prusa MK3/MK4 printers
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a protective plate that mounts to the MK3/4 family of printers and provides coverage to the underside for the LCD screen cables and PCB. Many of these printers have unprotected PCBs behind their display and this provides coverage there. The later MK4's have a rear panel on their displays but it does not cover the screen data and ground cabling. This model provides coverage for the cabling below the LCD or xLCD.
This model prints without supports using default settings in your choice of plastic. PLA should work, I used PETG.
Depending on your display mounts the attachment screws will vary. My MK3.5S with the older xLCD had M3-10 screws and this mount adds 8mm so I used m3-18 x4 to replace the original screws and capture this model's mounting struts behind the front aluminum plate of the MK3/MK4 frame.