1 / 5
IKEA 365+ 10.6l Filament Storage (non-destructive): Additional Modules — image 1
1 / 5

IKEA 365+ 10.6l Filament Storage (non-destructive): Additional Modules

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Some additional modules to @Oestle's storage set. For better fitting hygrometer and to store Silica gel.

Rating
4.5 / 5
Likes
11
Downloads
126
Makes
2
Views
735
Reviews
2

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

>> Use case

See for Oestle's version to get the base and filament rods.

Ikea 365 boxes are great to store filament in there! But it is more convenient to have them on some rods, so they do not roll around inside. There are many options on Printables to use it as a print-outta-box experience. If you just want to store your filament in dried condition, though, this non-destructive design is way more useful!

Use it in a 10.6l box where two 1kg spools are storable.

 

>> Module 1: Better fitting hygrometer stand

As described my design of a hygrometer stand, that fits in the base part via those hexagons.

Printing advice: There are some overhangs to be supported. Use the corresponding tools from the PrusaSlicer or a slicing software you demand! Relevant areas are marked blue in the image below.

 

>> Module 2: Holder for Silica gel

After some testing, here are the holder for Silica gel. It is to be installed right in the back of the box. There are two lines implementated to see when the gel reaches 50g/ 100g.

You can choose between a version with or without slits. So it is up to you whether faster printing or better airing is more important in your case. Both versions work just as fine!

If you meet with problems relating adhesion while printing, I added a brim to each version. It lets the hexagonal connectors free, so they can fit the cluster the best.

Lastly, two circles are in the stand's bottom. They should point to the back of the Ikea 365+ box.

 

 

Happy printing!

Makes are welcome :D

Tags