Polaris RZR Light Bar Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.19 – €0.23 net (excluding VAT)
For file: RZR Light Bar Mount v5_0.4n_0.2mm_PETG_XLIS_9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.21 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 9 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for the light bar on a 2011 Polaris RZR UTV (2 door 800s if that matters)
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 76
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I wanted a light bar mount for the RZR, so I bought one, but the one it came with kind of stunk, so I decided to make a new one. I wanted to attach it to the roll cage, so I made some roll cage clamps/sleeves that are under the roof on the roll cage, and this ties into them with a 5/16" nut. I then made another hole for a second nut to keep it from rotating. They ended up working perfect, but I did have to make a little spacer because my roof was not completely flat. I can send you the spacer files if you really want them but a couple of washers would do the trick just as well.
You can find the clamps in my models… I am goign to post them next so I'm not sure what the URL is yet.
I made it out of PET since it's outside. Pretty heavy infill to keep it sturdy. It's pretty solid as a result. If you want the fusion files message me.