Nordschleife - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hueforge of the famous Nodschleife "die Grüne Hölle"
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 79
- Makes
- 0
- Views
- 583
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Nordschleife is one of the most iconic race tracks in the world. This HueForge shows the layout of the track
Instructions
Project: nordschleife.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 178.57x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 1.5mm
Filaments Used:
PETG GEEETECH BLACK Transmission Distance: 0.5
PETG BambuLab Basic Blue Gray Transmission Distance: 2.7
PETG GEEETECH GREEN Transmission Distance: 5.9
This print uses 3 unique filaments
Swap Instructions:
Start with BLACK
At layer #8 (0.72mm) swap to Blue Gray
At layer #10 (0.88mm) swap to GREEN for the rest.
You can scale down the model in your slicer, but only scale down in the x and y direction. The height of the modell must stay the same.