Milwaukee M12 Battery Socket Negatives (STEP FILES)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tired of poor designs and hours of CAD work when trying to DIY for the M12 platform?
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 138
- Makes
- 0
- Views
- 354
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Here's a quick way to add an M12 Battery to your DIY projects. No more spending hours in CAD, just use these step files to subtract the material and poof… M12 SOCKET!
Keep in mind clearances when using these negatives. Make sure you leave yourself some space to pinch the tabs and disengage the battery.
Spade connectors that I designed this around are from Autozone. There is a picture of them up above. But since this is a step file, you can mod the holes for your connectors of choice. (**NOTE** Yellow insulation gets removed and not used. Once the spade connector is inserted, pull the rest of it through the hole with needle nose pliers from the battery side. The connector will lock into place and not back out once it's all the way inserted.)