1 / 3
custom clicky probe for V slot mounting (and sapphire sp-5 with enclosure)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
servo mount, clicky probe adapter and arm to install a variable clicky probe
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
inspired by the original clicky probe mounts and parts. I just didn't like how they interfaced and how loose the probe was held in the arm.
This mount uses slightly larger (15kg / DT996) servos as I tried it with smaller (MG90S) ones and they struggled and started to oscillate.
Mount gets attached with two m3 screws and t-nuts. Servo arm is pushed on the original lever arm and screwed in place. interface print has place for a small magnetic screw and the arm has a cavity for a 6x3mm magnet.