1 / 9
WisBlock Case with GPS, LoRa, Sensor Support & Custom Branding Area
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for WisBlock with GPS, LoRa, sensors, embossed GPS icon & space for custom logo. Not waterproof.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This 3D printable case is designed for the WisBlock Base Board (RAK5005-O) and is fully compatible with both Gen 1 and Gen 2.
✅ Features:
- Mounts with 4 standard screws included with the board
- Cutouts for USB, LED indicators, and SMA connector for LoRa antenna
- Snap-in slot for GPS antenna
- Space for onboard temperature sensor and buzzer
- Ventilation holes on top and bottom for passive airflow
- Snap-fit top lid with cutout for battery or solar panel connector
- Flat top surface for custom branding (embossed text, sticker, or logo)
📌 Embossed GPS Symbol:
An embossed GPS icon is integrated into the lower section near the GPS slot. It's 0.4 mm deep and can be highlighted by changing filament at layer 3 (for 0.2 mm layer height).
🛠 Recommended print settings:
- Nozzle: 0.4 mm
- Layer height: 0.2 mm
- 3 walls/perimeters
- At least 3 top and bottom layers
- Infill is not critical – choose as needed
- No supports
📌 Not waterproof – intended protected outdoor use.