1 / 8
Heatbed center mark - parametric (FreeCAD)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple sign to mark the center of the heatbed for calibration purposes. Prints very fast and thin version even faster
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 48
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
A simple model for marking the center of the heatbed for example for adjusting position of the webcam.
There are two versions of the model:
thick - 2mm height
thin - 0.4mm height
as well as parametric FreeCAD file to make your own version.
printing:
- make sure the model is positioned in the center of the heatbed (or a place you want to mark)
- prints well with PLA and default slicer settings
- one can use maximum layer height to print it even faster
- print thin version with 0.2mm layer height
parametric model:
- open the *.FCStd file in FreeCAD (https://www.freecad.org/downloads.php)
- double click object ‘dimensions’ from the object tree
- in the spreadsheet that opened set the dimensions as you wish
- right click on the ‘mark’ object and ‘recalculate’ it
- select ‘mark’ object and change the workbench to ‘mesh’ (in upper-left corner of the screen)
- with the ‘mark’ object chosen click ‘to mesh' and accept the operation
- select the created mesh and export it to *.stl file
Let me know if you find another application of this model :)
Happy printing!