213 models
Here, I present yet another storage contraption, this one sporting a fully symmetrical design which was the challenge I had In mind. Please read the text bellow before printing. 17-01-2024: Added files with 8,5mm opening for rods…
I want to say this is a pretty standard golf tee, just it is asymmetrical to be printed flat. This should help strengthen the tee due to the lengthwise layer lines. Disclaimer: I'm not the golfer, I was making golf things for my dad, and…
Info: another S-hook, but this one is tiny it is tiny, so even with PLA it is little flexible, but for small utils, it is quite OK. symmetric shape immitates perfectly round diameter metal hooks in my kitchen ( i created own model,…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
https://en.wikipedia.org/wiki/Deinonychus
Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…
I saw a couple other designs of 3D printable "fabric" and came up with this easy to print design. It has no bridges, does not need supports and looks just the same from top or bottom side. There's definitely room for improvement, e.g.…
This is a symmetrical stand which may hold almost every mobile device from the smallest iPhone till the 10.5" iPad. compact design: only 85 mm wide easy access to home button or home bar the other side can be used as a pencil holder
Although this was drawn from scratch, those with a bit of boomerang history under their belt will recognize that this is basically a remix of Axel Heckner's Triller . Or maybe it's a Lambda with a really long stub wing. The wings are not…
Dead simple but very useful symmetric hook hanger. Hang it on bathroom rail heater. It click fits! It stops on the bars under the one you hang it on (stops wiggling). Hang it on the panel heater. It fits in the top holes. Useful to hang…
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
Executive Summary: I have removed the files for the Bambu Refill spool. There was an error and these are too narrow for the inner cardboard tube. I am posting a new version as a remix and have updated the description. NOTE: I have added…
Just a remix of the POP gear hinge, but symmetrical Follow same print instructions MAKE SURE YOU PRINT IT THE RIGHT WAY UP.
Modifications by myself: Remixed the inner idler to allow for the use of a 5mm x 18mm pin. Modification by Kermit at Build it Basement : (Updated 2/27/2024. This file is in beta. We believe this newest version is near finalized. Feed back…
A set of 12 small clay cutters perfect for creating ear rings or pendants from polymer clay, ceramic or porcelain. There are 6 different asymmetrical sizes (50, 40, 30, 25 and 20mm), as both a left and a right one. Best printed solid with…
Why remix it? Remix based off of AmanozyakuLAB 's Yajirobe model in Thingiverse because the original was huge, and also lop-sided in its balance because of the asymmetry. So I made this symmetrical version that uses the nicer smooth wings…
Another twisted vase, this one symmetric, designed in Fusion 360 using Form and Surface. Fusion 360 source file included in case you want to tweak something (also STEP). Currently walls and bottom have 0.8 mm thickness. In case you want…
This model is compatible with the lego system.
Description This is a remix of the awesome “Ultimate Prusa (MK4) casing” by Cal’sTechConcepts . I really liked the way his designed looked on the right LCD side, so I have mirrored that design over to the left for a symmetrical cupped…
I've remixed and fixed the Symmetrical submod of BFI (rollback to original mod - pin instead of screw / M5 for extrusion mount / extended the extrusion bracket / other small design fixes) . Print two of each with Voron specs. Additional…
Update april 2023: The Bambu Lab X1C and P1P are printing more secure as my Prusa's so I've minified the tolerances to make it print great for printing at the Bambu Lab X1C and P1P === I had some problems using the otherwise great…
So we've got the ZS-VML here. A 3d printable mouse designed for FDM printing. It's a symmetric mouse that's based off of the Razer Viper Mini. It's got a lower hump, higher front, and slightly wider sides. You can find this mouse and more…
print time: 1h 30min filament cost: 3m 1 gear size: 30mm spins freely check my other prints. I will be glad full for some feedback ;) enjoy
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
This is a specialized version of the 'Pluggable Containers' thing: https://www.thingiverse.com/thing:4675184 . It lets you create different symmetrical pluggable containers in the openSCAD and thingiverse customizer. These could be used…
This is a very handy paracord/string ratcheting winch design that can also hoist and cinch. It is very easy to print, requires no supports, can be printed in pretty much any material at any % infill (100% for strongest). Instantly ready…
This is a remix of Michal Fanta’s excellent Low-Poly Mannequin Head made by mirroring the right side of his model and trimming the bottom a couple of millimeters. Since I only needed the head, the model was split horizontally at the top…
This low profile DIN mount for the Manta M8P v2 shifts the board off center on the rail. There are two different versions available, both moving the center of the board by 10mm but in different clamping directions. Mounting holes are…
Symmetrical case for WaveShare ESP32-S3 4.2inch RLCD Simple and fast to print case with symmetrical borders around the display. The case allows to access the USB-C port and SD card slot and comes with 3 little button extensions for the…
Base size is 215x100mm my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.4 Resolution: 0.16 - 0.28 Walls: 2 Infill: 8% Material: Brand: Prusa Material: PLA Color: Galaxy Black printed on Creality Ender 7
The parent design is nice and simple, but I wanted something even simpler, and with a slight overhang to aid the ergonomics. I took the STEP in the parent and modified this to be more symmetrical and added a slight overhang to aid…
I fell in love with the original and can't stop making them, but the asymmetry of his face was giving my OCD anxiety. His face now is the same on both sides and looks more even. The picture of the print is fresh off the printer, with no…
guide: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa -Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable AAA via magnetic microusb tip or 675 coin…
Cable holder designed for printing with flexible material. Holes for a cable are asymmetric (wide on one end and narrow on the other) If you need this model in a different configuration dm me or comment and I will upload it. 2024.10.13:…
An asymmetric solution to store five UnMatched fighters in a two fighter box. This comes in two parts. The best part is, it fits one map and the rules booklet while the UnMatched box shuts all the way! The smaller of the two sides holds…
These are replacement front idlers for Vorons (and Voron-based machines). This design is available for Voron Trident and Voron 2.4. SBFI for Voron 2.4 4× M5×30 BHCS 4× M5 hex nuts 2× 5mm-diameter pin, 18mm long 2× M3 t-nuts 2× M3×16 BHCS…
Symmetric beefy front idlers for v2.4. Simple remix of Tetsu's symmetric idlers, all I did was add skew markings and optional comic sans. Thanks to Hector at Fabreeko for the numbering suggestion.
Candle holder for IKEA GLIMMA. Supports: No. Layer Height: 0.2 (optional). Printer: Prusa i3 mk2 clone. Slicer: Prusaslicer Print Time: 3s 10m (0.2mmm Layer Height) Note; Soon there will be formwork for concrete casting.
That's basically symmetrical version of @Matrix's wine stand. It bothered me that original model is not symmetrical so I remixed it.
print time: 2h material cost: 4m size of gears 20:40
Discover the versatility of these asymmetrical S-hooks, perfect for various household uses. Available in multiple sizes, the inner diameter of the hooks ranges from 15mm to 30mm. The file name indicates the larger inner diameter, while…
Another "two parts go together to form a cube" puzzle. Best if printed in two colors. Print instructions Orient the model so that the face that looks like a letter "D" is face up, and it'll print without supports.</p> I find 33mm the…
You've probably seen the A1 Mini mystery kits for a printed mouse. I think it's pretty neat that Bambu Lab is including those as there are plenty of others to try as well, like this one. It's an asymmetric shape I made that has design…
Asymmetric Tray Small tray suitable for keys, airpods etc. Print Settings Tray has been designed to print without support. 15% infill 0.2 Layer Height (Lowering the layer height may increase the surface quality) Support Future Creations…
I needed a symmetrical snowflake so I took this Frozen design, cut a 30 degree pie slice and mirrored it around. It's Frozen reminiscent, but symmetry was more important to me than accuracy for the Christmas decoration I'm making.…
One of several tealights I designed while I was at College and then worked on bit more as I do like candles and experimenting with new materials which is why I even casted them in concrete and resin. I aimed to make them simple and…
The complete set of right-angled, asymmetric Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
Small connectors that clip together
These are the left and right Z Bracket that are suitable to be used with Creality Sprite Extruder Pro that prevents the extruder to hit the brackets and allows the usage of full bed size of 235x235mm vs the limited version of 215x235mm.…
The complete set of Stemfie3D U-shaped symmetric beams. get.stemfie.org x.com/stemfie3d
I redesign ztop of Ratrig V Minion because I prefer a a symmetrical piece, Its more beautiful than original.
Print Settings: Normal Voron print settings To apply settings to the Voron logo on the magnetic cap, you will need to split the part in the slicer Bill of Materials: All: 4× M5 hex nuts 2× 5mm-diameter pin, 18mm long Trident: 4× M5×40…
I designed this magazine adaptor using a 3D scan of the Dart Zone Max Stryker 2.0 so the shape of it better follows the rest of the blaster. It is also shorter, and has much bigger flair to the magazine well including opening up one side.…
The opened chock to attach the rope.
.15mm layers TPU 95A Best if printed standing up and painted on supports for the bottom near the bolt holes and bridge of the curve.
This is one more V-shaped boomerang with a bit of hook flight characteristics. It will need tuning after printing and there are many good resources about the topic online. I recommend "Ultimate Boomerang Book" by Michel Siems as well as…
I'm really glad that Pwnage Ultra Custom has fully-modeled, perfectly-scaled models of their mice on their website. Allows me to pull it off the website and convert it to .stl's for people to make replacement parts for them. Some parts…
This is a rounded version of Patrick Roberts' spheroform with tetrahedral symmetry that retains the constant-width spheroform property. This is a remix using tmackay's variable-detail polyhedral OpenSCAD design combined with Jamie_K's…
This is a slightly modified version of this design . I changed around the angles of the wingtips and distorted the elbow slightly. The intention was to make the boomerang fly a little bit higher, which seems to have worked.
Mirrored version
Another variation on the tensegrity tables that everyone has been printing. In general, most of them I've seen have been interesting, but really, really ugly! This is attempt to make something more attractive looking. see:…
I made this remix to fit my storing solution for a TS101/TS100 soldering iron which can be found here: Storing solution for TS101, TS100 soldering iron & addtional tools I made a variety of gridfinity based containers/bins and made a slot…
This is a centerpiece to build an dipol with symetrical feed line @ 450 Ohms (like CQ 553 flex wire). I recommend to use the new version (NG) with the improved and strengthened relief. It is still designed for the CQ 553 flex wire but may…
Spheroform with Tetrahedral Symmetry Inspired by Angus one Friday night Ultimate Solids of Constant Width . I thought I would combine the ideas of tetrahedral symmetry and a low poly/fast OpenSCAD implementation. Third attempt following…
Doniczka z pdstawką lub bez.
How the Lock Works The lock plate has three positions. The center position is unlocked, while both left and right are locked. One key can only turn the lock ring clockwise, and the other key con only turn the lock ring anti-clockwise.…
The complete set of symmetrical T-shaped Stemfie3D beams. The 191 files, ranging from three to twenty block units (holes), are available in STL and stepZ format , which you can open and edit using FreeCAD . STEMFIE news 👉 X.com/stemfie3d
I needed a basic ski jumper that can go down a ramp, so I split the Basic Skier Figurine model by independencetech down the middle and mirrored the better half. You can see my work in this video:…
Dual WaveShare 4.2“ desktop e-Paper case - symmetrical and without holes Dual display version of my “ WaveShare 4.2“ e-Paper case - symmetrical and without holes ” display case as desktop variant. It can hold up to 2 ESP32 controllers and…
The complete set of Stemfie3D slotted symmetric braces. get.stemfie.org x.com/stemfie3d
The Thomas' Cyclically Symmetric Attractor is a fascinating example of a strange attractor that exhibits chaotic behavior with a unique symmetrical structure. It was discovered by René Thomas, a Belgian biophysicist, in the context of his…
Asymmetric MagSafe Charger Stand Meet the asymmetric MagSafe charger stand that adapts to the dynamism of modern life while elevating your aesthetic sense. This unique stand combines creative design and functionality, ensuring your desk…
The business plan. Thicker outer walls for wheel stands to reduce likelihood of breaking off Added slots on base outside of wheels for placing status tokens. Kept 3 slots for status tokens behind wheel because you never know when you will…
This single STL file creates a symmetric bracket – print two for left/right sides to mount any tablet up to 7.5mm thick, like the Redmi Pad 2 (254.6 x 166 x 7.36mm). Designed for Home Assistant wall kiosks: secure hold, easy snap-on/off,…
What does the title of this mean? Bilateral symmetry is where a pattern repeats left to right, but not radially. So, this top looks very different staring down the X axis than staring down the Y axis. Even so, it is very stable and spins…
The only change to the original model is the now symmetrical grid.
Just made this because some people like it symmetric in another way ^^ Category: 3D Printing
A single asymmetric trigonal trapezohedron inspired by @DesignMakeTeach's tweet. (Could be used as a fair but funny D6) https://twitter.com/DesignMakeTeach/status/1296179875368370181 Coordinates taken from…
What it is A funnel with a rectangular shape, so that it fits in a small component bin. The funnel is optionally asymmetric, which means that the wide part is not sloped on one side. If the component bins have a lid that opens up to 90…
This napkin ring's loose asymmetric weave adds a light and airy feel to a setting. Mix and match this design with others from the complete Tableware Collection . Instructions The designs can easily and successfully print without rafts or…
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
Adjusted the design to accept m3 screws and nuts + removed some material. This is a remix from this design: https://www.thingiverse.com/thing:4659115
GUIDE https://www.instructables.com/Z100s-3D-Printed-Symmetric-Wireless-Mouse-Guide/ VIDEO GUIDE: https://youtu.be/o0P37Avcor0 -60g with AAA. Mass will vary based on battery and print material. -Wireless using G305 Internals -Rechargeable…
Drip ring for symmetrical 4-part Itiwit kayak paddle. Simple addition to your paddle to minimize droplets in your kayak. I uses latches that are aleady build in the paddle. Does not require any modifications.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
■ OVERVIEW Optimize your pouring and liquid transfer tasks with this versatile eccentric funnel. This model features an asymmetrical, offset design that allows you to easily pour liquids in tight spaces, corners, or close to walls where…
The complete set of cross-shaped, symmetric Stemfie3D braces. STEMFIE news 👉 X.com/stemfie3d
A more symmetrical version of the assassins creed logo.
My first ever model shared publicly in 2015 (on Thingiverse). Oh, those were the years with the first Printbot Simple Metal... :) Quick light design for all of you, who wants to use standard 120mm PC fan to cool your prints (area…
This model is featured in figure 5.11 of Visualizing Mathematics with 3D Printing . Category: Math
This floor seated uplighter is designed to give a soft ambient glow. The bulb can be slid forwards on a track and also be tilted to allow spot lighting or a softer ambient light. The electrical connections are made with WAGO 222-412 which…
This mixture between a vee shaped boomerang and a hook has some very nice range; even the relatively small print shown in the cover photo does some 40-50 meters. Throw it low and with a good bit of layover. Probably more suitable for…
Boomerang for recreational throwing. I have included two versions, the second one being slightly more streamlined to reduce drag. I would recommend the regular one for windier conditions and the streamlined, "less-drag"-version if the…
What was changed in this remix: different size of the rolls made by @Herranz_81298 to fit in to original body design of @Twotone74 reduced bearing placement diameter (22.1mm → 22mm) longer shaft for tight fit (158mm → 160mm). It could be…
Festool SYM 70 SYMMETRIC Insert for saw table. As is well known, this insert needs to be replaced from time to time. It fits my saw perfectly. I printed them like this: Nozzle: 0.4 Layer: 0.2 Support: only on the print bed Filament:…
Basic info: Print time: 5-6 hours Filament: AzureFilm Silk Gold PLA Size: 210 mm (maximum of MK3) Weight: 100 grams Model is solid, you have to set top layers and infill to zero. Printed with 3 perimetres at 0,22 mm layer height to be…
Command presence and symmetry with this striking pair of Twin Wolf Guardian Statues . Seated in perfect alignment atop a shared plinth base, these wolves evoke the feel of ancient temple guardians or noble estate protectors. Their layered…
This is a remixed version of Giack_95's design ( https://www.printables.com/de/model/280453-opel-logo ). I have resized the model to 200% (160 mm outer diameter, 16 mm width) and redesigned the logo's stand to match the curved design of…
Saw Jangos 2.4 remix and decided to adapt them for the Trident.
Mirrored Flared design
