WLED BOX–ESP32 D1 Mini/C3(Snap-Fit,Sound Reactive)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A precise, standard-compliant enclosure for WLED projects using the ESP32. ESP8266
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 46
- Makes
- 0
- Views
- 590
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🧩 WLED BOX – ESP32 D1 Mini / C3 (Snap-Fit, Sound Reactive)
A precise, standard-compliant enclosure for WLED projects using the ESP32. Designed for makers who want to build it by the book, with proper components, clean wiring, and a durable snap-fit lid.
🔧 Features
Supported Hardware:
- ESP32 D1 Mini or ESP32-C3
- SN74AHCT125 logic level shifter (or compatible)
- INMP441 digital I2S microphone
- 3x SPL-1 / LT221 lever-style connectors (for VCC, GND, DATA)
- Internal cable management channels
Lid & Assembly:
- Snap-fit lid with alignment slot
- No screws or glue required
- Hot glue recommended for internal stabilization
🛠 Assembly Notes
- The level shifter is mounted on a small piece of perfboard/PCB, allowing for easier handling and soldering.
- Wiring follows the official WLED documentation (for both ESP32 and microphone).
- The case encourages clean, modular, and reliable connections.
📐 Case Details
- Front engraving: Rodic WLED Bare V1.0
- Compact and professional design
- Easy solder access to all components
🎯 Ideal For
- WLED installations with addressable LEDs (WS2812B / SK6812)
- Sound-reactive LED lighting
- DIY smart lighting setups
- Permanent or portable use
🖨 Print Settings
Layer height: 0.16 mm
Walls/perimeters: 2
Infill: 15%
Supports: ❌ Not needed
Brim/Raft: ❌ Not required
Orientation: Print as-is, no rotation needed
Printer type: FDM
Material: PLA or similar
🔄 Future Plans
Additional versions for other boards and configurations will be released in the future.