Moto suspension forks boots-socks shields cover clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Motorcycle boots don't allow the stock shields to be fitted, and the rubber over aluminum seems like a too basic setup.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 23
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Motorcycle boots don't allow thestock shields to be fitted, and the rubber over aluminum seems like a too basic setup. This can be used not only with boots but also for normal fork bushings protection, especially the tall one, in case the bike dont have this. There are two versions a ‘’slim'' one that is minimal and a taller one that also has some side deflectors. The diameter that would fit starts with D=63mm, but i can be bigger, no smaller than -10mm. An additional 2x M3x20 is needed. Fit it by inserting it where the fork tube section is minimal.
Fillament- must be at list a quality PETG, it will be flexible enough for fitting. Walls-3 or 4,, Infill-80% cubic.