1 / 8
Tool Board Mount and/or Magnetic Parking for Jubilee Tool Changer's Baby Bullet Extruder — image 1
1 / 8

Tool Board Mount and/or Magnetic Parking for Jubilee Tool Changer's Baby Bullet Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

'dumb' tool board mount/brace that turned into magnetic parking.

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
52
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Dumb tool board for Jubilee Baby Bullet can be found on oshpark.com:

There is a version of the tool board brace/mount with and without magnets.
Not tested but magnet brace should work without the tool boards depending on your setup, OpenSCAD file is provided if changes are needed.

Brace is mounted on tool by replacing bolts for part fans with longer 18 or 20mm bolts that extend though the brass inserts into the brace.

  • The orbiter 2.0 version is untested and moves the tool board up 2.0mm; Without the tool board it shouldn't mater which version you use.

Frame side, parking magnet sits on top of the tool holder, with legs going in the Allen wrench holes.  I included multiple parkingTHMagnet_v0_3-*.*.stl with the magnet moved farter from tool to make easier for machine to remove tool from parking spot.

  • parkingTHMagnet_v0_3-0.6.stl, is closest and the only option with a hole for a Allen wrench to adjust tool height.
  • parkingTHMagnet_v0_3-7.6 is adjusted as far away as possible.
  • parkingTHMagnet_v0_3-6.0, is the one I am using.

½" x 1/8" Magnets are embedded in the parts while printing, add a pause as needed in slicer, make sure to keep the same magnetic pole pointing down on all parts.

Warning: parking, pickup scripts and print area need to be checked and updated if needed to avoid collisions; I have my print area set to 290 in Y, your results might vary.

Tags