Pole Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount pole mount devices, to a flat surface or a corner.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I designed this to simplify installation of my Ubiquiti NanoStation NS-5AC.
The focus was adjustability, during and after installation.
All major components (base ← m12x1.75 bolt → post and corner adapter) are 3D printed.
Recommend applying Silicone lubricant on bolt shaft and threads before assembly.
Mounts a variety of devices.
Vertical and horizontal adjustments are easily made.
The only additional hardware required are screws and cable ties.
Mount is designed for flat surfaces.
A corner adapter is included, if required.
UPDATE: 21 July 2025 made post hollow
UPDATE: 23 July 2025 cleaned up an offset.
Flex-HD Access point adapter is included in another model.
https://www.printables.com/model/1404304-ubiquiti-unifi-flex-hd-pole-adapter
Camera adapters, are included as another model.
https://www.printables.com/model/1362823-camera-mount-adapters
With the Pole mount transformer + adapters, multiple devices could be mounted in the same location and pointed in different directions.