Counting matching models…
This is a mini tripod for cameras. WHY? I wanted an small tripod that would be able to carry a DSLR in portrait and landscape mode. Many 3D printed tripods where either too small or not stable or didn't support portrait orientation. So I…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for specifically for 3D scanning. It also locks down well, once you add the noted washer to the deck…
If you have a camera capable of taking 220 roll film you can use it to expose a full roll of 35mm film using the adaptors in this print. I've tried other 3D-printed adaptors but none worked in my Hasselblad A24 magazines, which is why I…
yes this cover is thicker than normal, but you can lay it flat. No buttons or cameras are sticking out. i included step files, so you can modify it. I printed it with TPU Category: Mobile Phone
Additional hardware needed. (Full list of all hardware parts will be coming sortly)
I could only find Chin Mounts online for the K3 SV, so I 3D scanned my helmet. Fit's well on my large and my girlfriends small helmet. The file is a bit lumpy as a result of using my phone to scan the helmet, could probably be smoothed…
This design is actually a bit of a spin-off from my tiny tripod ecosystem: https://www.prusaprinters.org/prints/37671-tiny-foldable-tripod-ecosystem-for-different-actio After I got my GoPro Hero8, I first added a GoPro specific part to…
UPDATE Sept 2023: Improved the size of the SX-70 version (others to follow soon) to allow for the newer Polaroid batteries. These are now .3mf models exported from fusion360, and may not be in the proper orientation. ---------- This is…
Made an extra 120 film spool for an old vintage camera, thought it might be useful to someone.
A 3D-printable film cartridge for Agfa Rapid film cameras The Rapid film system was Agfa's answer to Kodak's 126 cartridge back in the 1960s, a quick-loading 35mm film format. It was based on an earlier Agfa cartridge, with the addition…
This model consists of the cameras for the Apollo Launcher / Umbilical Tower used to launch the Saturn V rocket. This is part of the Apollo Umbilical Tower model. See the parts spreadsheet of that model for a complete list of parts by…
If you place your Reolink E1 / E1 Pro / E1 Zoom Surveillance Cameras in a high position, you will not be able to see much of the room, especially if it is a small one. With this tilted base you will be able to make the camera frame more…
I designed the cap for when the camera is stored without a lens. The model is a multicolor design. It also can be printed without the letter by leaving the place empty (you just have to delete the three parts of the letter in the 3mf…
The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…
This is a set of 1mm, 2mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, and 10mm M42x0.75 adapters. The 4-10mm adapters are Male to Female style adapters, while the very tiny 1 and 2mm adapters are Female to Female adapters (they just sit between any…
This is a simple body cap for a wide-angle pinhole on a Sony mirrorless camera. It's also my first ever finished design. I printed this on an Ender-2 Pro with Creality filament, using PrusaSlicer defaults. I used 0.16mm layer height, with…
Most people use the Raspberry Pi + Pi Camera setup for their Octoprint… but I had a spare Odroid XU4 laying around. Trying to find a camera similar to the Pi Cam, I stumbled onto ELP cameras. Similar footprint to Pi Cam, and pretty cheap.…
Mount is compatible with Reolink E1, Reolink RLC-410W, and TP-Link Tapo C200/C210
Simple mini tripod for common action camera mounting system. Designed and tested for dji action 2. For assembly you need 3x M3x16mm screws and 3 nuts (i recommend using nuts with nylon lock for better feel and constant tension).
3D printable eyepiece for Nikon cameras replacing the DK-17. I also included a 3D file of just the thread, which you can use as a base for your own custom eyepiece or cover design. Printing recommendations The thread on this part is tiny.…
Usage Print two of each part, one set for input and one set for takeup. The top and bottom parts nest, enabling two sets (an entire kit) to fit into a standard Kodak-style film canister. To load film, cut off the leader and tape to the…
Simple Adapter that makes it possible to use 35mm in 120mm Cameras. I was tired of people selling them way to expensive. The Plug is for Kiev 88 Magazines, they have a hole to check the alignment of the numbers from the back of 120mm…
Remix of Anachronism great HotShoe Cover. Added new OM Systems and Lumix logos to both for my cameras that needed hot shoes. These were printed in resin on an SLS printer. Fine details will required .25mm nozzle or SLS to get the results…
Bahtinov masks create diffraction patterns that can be used to quickly and precisely focus a lens. They are commonly used in astrophotography. The procedure is to put the Bahtinov mask in front of the lens, point the lens at a very small…
The Pentax M series bodies are a great affordable entry into the analog SLR market. With access to great affordable K mount lenses and packed with more features than the now pricier K-1000. The only problem for me is their small size.…
One of the most popular/visited reviews on our site is the JJC EC-6 Eyepiece Eg Extender . If you're not familiar with the eyepiece extender, it extends the eyecup 5/8" (15mm) from the camera body. This is useful for eyeglass wearers and…
Wanted to use a cheap indoor home automation PTZ camera to ‘spy’ on our new puppy. Most of the surfaces nearby were too close and too high, so quickly designed and printed this angle mount to all the camera to be mounted at an angle so we…
A GoPro like mount for the Happymodel Mobula8. It can be used to mount a light camera like the Runcam Thumb or Thumb Pro to the Mobula8 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Supports: Yes Resolution: 0.20 mm…
English below. Hier ist ein Remix der auf 80% gescaled vom Orignal ist, um Gewicht und Platz zu sparen. Dieses Stativ ist ideal für reisen mit kleiner Fotoausrüstung ohne auf etwas zu verzichten! Hoch oder Querformat sind problemlos mit…
This is a junction box to mount a Reolink camera to the wall with enough space to handle the wiring pigtail and still feed the power wire through the back into the wall. Notes: The .3mf files are included if you simply want to print the…
Please comment, rate, and post a make! A mount for the Unifi G Pro series cameras to allow them to be setup on a tabletop. The mount body is angled at 30° to allow the camera to be pointed horizontally. The screw holes are sized for the…
This is a relatively low profile 49mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as you might use on a Ricoh GRIII, which can also use the same batteries……
Remix of https://www.thingiverse.com/thing:67330. I trimmed the edge with a face model. It fits well on my a6000.
Camera Mount for Tinywhoop Racing 15 - 55 degree tilt McStinkyHDZ is for the HDzero Nano Lite, there are also spacer files to raise the mounting point above the vtx board. TheMcStinky is for cameras with a 10mm lens and 12mm body, like…
This is an eyecup compatible with the following Canon cameras, fits cameras that fit the Canon ED eyecup: Canon EOS Film Cameras : EOS-3 EOS-1V EOS-1N EOS-1 EOS-30 / 7S / 7 NE and so on Canon EOS Digital Cameras : EOS-1D series (including…
This is a relatively low profile 40.5mm filter thread adapter for the OM System TG-7 and other Olympus Tough cameras. This lets you use the same filter size as the default Olympus/OM System filter adapter CLA-T01. I suggest printing the…
.4mm nozzle .12mm quality tpu print temp 228 bed temp 55 print at 99% scale creality cr-6 se
9, 15, 22.5, 30, 45 & 90 degree angle adapter able to mount to 4" Circular electrical work boxes for cameras, floodlights, etc. There is a flange part, and an adapter part. Category: Household
I have arthritis so I wanted a lever action film advance rather than a knob, and I wanted the lever to automatically return to the at rest position after each stroke just like the commercial roll film backs that I have. The design goal…
This is a complete ecosystem of parts needed to place a small camera somewhere and fine adjust its orientation around all three degrees of rotational freedom. The problem: Using an action camera to capture our wild and crazy activities…
Intro This is a three-piece film scanner adapter for 120 film (6x6 only), for use with the Essential Film Holder (with its parts reorganized in order to have the necessary height to fit in - 32mm from the bottom of the feet to the top of…
This print with the specified ¼-20 nut replaces the standard Reolink provided ceiling/wall mount base of the Reolink RLC-520A Camera with a base containing a ¼-20 nut for tripod mounting. This base also works with the RLC-822A . I modeled…
Re-upload from https://www.thingiverse.com/thing:6678393 Designed by Photochemicals. Please refer to the thingiverse link for instructions!
This is a quick release tripod adapter for Akaso action cameras. Akaso is similar to GoPro, but the “tongues” on the Akaso mounting hardware are thinner than the GoPro hardware. I modified the original model from tmorris9 on Thingiverse…
This is my version of UniversalMaker's Instant camera stand. It needs no supports to print, and uses very little filament. I printed mine in Flashforge Black, white and green PLA on my Adventurer 3 pro, and my Ultimaker 2+ and it worked…
This design combines two 4x microscope lenses together to create a stereoscopic 3D macro lens, with 2x magnification and a 5mm stereo baseline. It has been designed to be shot handheld in the field using a flash for lighting, rather than…
The adapter makes it possible to fit standart cable releases to various TLR, Leicas and old Nikon cameras. The threads are very fine. Print the adapter at leas with a layer hight of 0,1mm. If you can, print it even finer. The adapter is…
Nozzle: 0.4, layers: 0.2 . This is a prototype, I will not develop it further, because 3 adapters work perfectly for me. You also need springs, sheet metal, sheet metal scissors, a file, sandpaper, a screwdriver and small screws and…
I didn't know of any available adapters for these unusual lenses, so here one is! The smart little Kodak Cine-Ektar 25mm f/1.9 is the only one I have tried, but the coverage on a Four Thirds sensor is pretty good and it is quite usable. I…
M42 and T2 extension tubes and adapters usually are sold without protective caps (same for bayonet/thread adapters and the like). This may be ok for initial transportation, but if you have configured a setup to use those items that you…
Attach this mount with the included vertical magnetic mount side ways to your camera, it gives a additional grip with two cold shoe attachments. Use full to attach your lights or camera to your DJI action 4 or action 5 pro camera.…
This is an M42 Lens to 1.25" adapter for cameras planetary cameras with 12.5mm back focus, like the ZWO planetary cameras. It has an integrated vixen dovetail and a photo tripod nut. Works with the factory ZWO 1,25"/T2 adaptor with a…
Designed specifically for seamless integration of the Reolink RLC-520A camera with both indoor and outdoor round junction boxes. This adapter facilitates the use of conduit systems or alternate mounting solutions, providing flexibility in…
Heyho :) Here I have a holder for all Arca-Swiss parts. This is practical if you want to store your camera safely but within easy reach. (I have children running around who can get everywhere :D And when you put them away you just can't…
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament. *tested for HIKVISION DS-2DE3A400BW-DE-W(F1)(S5), but it should work…
Comes in two versions. The first version is a basic flat lens board with all parts of the board beefed up for added strength. You can add a custom sized lens hole and if necessary a thinner area for a retaining ring or a thicker area for…
This consists of the Side 1 Railings, Lights and Cameras for the MLP. This are part of the larger Shuttle Mobile Launcher Platform model.
Took the base scanner assembly and adapter tube from https://www.printables.com/model/237687-35mm-film-digital-mirrorless-scanner-holder and added an upper section sized for a 50mm Tominon Macro Lens with adapter tubes to connect to a…
Battery case (and double-battery pack) for Olympus / OM Systems batteries BLX-1, BLH-1, BLS-1, BLS-5/50. One or other suits most OMD micro four thirds cameras. Includes one assembly with dual case (side-by-side) for BLH-1, just because…
The knob has a threaded 1/4-20 UNC screw that is compatible with most of the camera tripod mounts. The tolerances for the knob are very small so it won't jiggle around once in place. A well calibrated printer is a must. I printed mine…
I've bought a TP-Link Tapo C100 Camera to substitute one of my Reolink E1 cameras that broke (it's the third E1 that stops working in less than three years... stay away from this model!). Even though it can be tilted downwards, if you…
this eyecup for my old Nikon camera blocks out ambient light when looking through the viewfinder. I use it on my Nikon FE and F3. it might fit to other brands with same system of viewfinder. it is very pleasant to use and to focus. It…
3D-Printable Solar Panel Roof Mounts Designed for flat installations, these corner pieces provide a stable and secure way to attach USB solar panels to your roof. Each set includes four identical mounts optimized for strength and…
Now that FP100C et al have gone the way of the dodo, Instax Wide is the instant film I've turned to. I have been shooting it in film holders and doing the dark bag shuffle for a few years. I started converting some Wide300 cameras to make…
Hinged Photo Frames for all popular instant photo formats. Use M3x30 screws to assemble.
I tried to fit the aesthetic of the 500EL with a quick and easy 3D print that will improve visibility of the focusing screen if you're without a viewfinder for your Hasselblad. Print requires no support, standard settings will work fine,…
The Samsung Portable SSD T5 has proven to be an incredibly useful tool. We initially offered the 1TB & 2TB models for fast data backups/transfers; however, our customers have recently shifted to using them mostly for video footage…
Case for Akaso EK 7000 (also works with cameras with dimensions high 41mm, deep 27mm, lenght 59mm) This print turns out better if you print this with TPU! by problems please write a command or contact me via E-Mail…
Technocrane git card. https://www.supertechno.com/ https://www.supertechno.com/supertechno-50 Tisk bez podpěr. Materiál PETG, PLA. Obrázkový návod:
It sits on top of your monitor, and the threaded bolt at the back tightens it against the monitor to stop movement. The ¼" 20 UNC thread can take the equivalent bolt, allowing you to attach ball-heads, lights, webcams, cameras or…
Here is the help for those who know the problem! Gears: Nozzle: 0.2 Layers: 0.16 Speed: Slow! Material: Harder PLA ( If you are very brave and your printer is very precise, then try it with a 0.1 nozzle. ) :) Other parts: I trust you You…
This adapter imitates polaroid instant film, and allows you to put instax square film into polaroid film magazines. To use it you will need empty 600 (with working battery) or SX-70 film cartridge, one used polaroid picture or Darkside (I…
VeloLock – Quick Release Camera & Accessory System VeloLock is a compact, high-speed quick-release mounting ecosystem designed for cameras, field monitors, microphones, LED lights, rig accessories,... . VeloLock was specifically designed…
These are various brackets I used throughout my house to attach Eufy cameras to the walls or at the top of shelves.
LCD screen and buttons cover for Leica M10 series cameras - V6 version Improvements over V5 model mount plate is completely covering base plate of Leica camera, providing extra protection but also more comfortable grip LCD cover plate has…
Created a 3D basic skin for the famous folding SLR Polaroid SX-70 Instant Cameras based on the SVG file with exact dimensions from @b3nsn0w. You can use a plate with patterns or just a regular one with different colors. Looks cool, easy…
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount. Big thanks to user PHOENlX for providing mount on Thingiverse. https://www.thingiverse.com/thing:4930947 Print Settings Printer Brand: Prusa…
This is the third iteration of my Cold Shoe adapter, designed specifically for the older Leica cameras with no cold shoe leaf springs and a shorter insert length than the modern ones tend to be.
Camera mount for Tapo C200 , C210 cameras and alike. THe original inverted mounting hardware is necessary to screw in the inverted base for the camera in the mount. The file includes a small hook which needs to be printed twice , and laid…
I wanted a way to get some more interesting shots for my Youtube videos, so I designed this small adjustable dolly for my GoPro. Hardware Required: -2x M4x6 Hex Screw -7x ¼ x 18mm Hex Head Bolt -2x ¼ Nut -4x 608 Bearings Supports only…
This mounting system was originally designed to be used with Manfrotto Magic Arms in laboratory environments, but can be adapted to all sorts of applications. The camera rails have a fixed distance to the center of the ring-lights and the…
This compact, easy-to-assemble teleprompter is designed for DSLR cameras and works perfectly with the Tamron 17-28mm lens at focal lengths down to 22mm. It lets you read your script while keeping direct eye contact with the camera,…
Remix of Anachronism and Steves great HotShoe Cover, its a bit flatter to fit plane on the camera also ive added a small grip. I've printed it in glow in the dark pla (looks rly nice) with 0,15 layerheigt and 100% infill.
Wall bracket for aosu security cameras HL1 base. 3D printed on my Sovol SV05. Designed in Solidworks.
The Open Source Universal Ball Joint by DieZopfe is fun to play with. I made some ball heads with Arca-Swiss plates (not published yet) and therefore I cut the nut in two halfes with a larger collar holding them in place. I used that…
Background I've always wanted a full spectrum camera. But I also want it to be convertible, that is, it can both be used as a standard camera, and by swapping out a filter, be used as a full spectrum camera. I chose GX850/GF9 for: a) it's…
Waterproof cover for DC Connector. Used for outdoor cameras in order to protect the dc connector when the camera is powered via PoE. For best results use flex filament.
Vixen-style dovetail mount for non-cooled ZWO ASI cameras. It is remixed from jamesdedij's excellent ZWO filter holder. Printable in two parts, 2pcs. M5*30 screws are needed to join the parts. I also added some epoxy. I decided to split…
Custom adapter to mount Magnifying Eyepiece on Fujifilm X-T30 camera and alike. With e.g. SMDV 1.33x magnifier it is making view larger than Fujifilm X-T5 or Nikon ZF (see pictures). Here's extended article on the ongoing effort and…
This is a 3D printed film advance lever for Most Fuji GW model cameras. I have designed this based off of the original so it will look and fit very closely to the OEM version. This film lever will perfectly fit the following cameras:…
The Mini Tripod for DSLR and Digital cameras offers a full 360 degree rotation plus 180 degrees of tilt and is exactly what I was looking for. It also locks down well, once you add the noted washer to the deck screw. This Monopod base…
I designed this adapter after failing to find one that suits my needs. These are the highlights of my design: As thin as possible to help in acheiving prime focus. Locking pin hole included to prevent unintentional release (and to prevent…
Wall mount for Xiaomi Mi 360 surveillance cameras
3D printing, i designed it with some clearances in order to add some kind of dampening to not scratch the drone, i would use some double-sided tape without taking the other side. Use m3 heat inserts, and 18mm m3 bolts, for the cameras its…
This pole can hold two Tapo C310 TP-Link cameras. I use it to monitor two 3D printers. The object consists of a base plate and a top mount. In the base you have to place a vertical PVC pipe of 40mm thickness.
This design uses 5mm neodym sphere magnets in all four corners. Create a photo stand or display the photos on the fridge. Print the upper and lower frame separately, put the magnets in and just slide the pieces into each other when…
This 3-slot cold shoe mount adapter is designed for DSLR and mirrorless cameras, allowing you to expand the number of accessories mounted on your camera. Compatible with Nikon, Canon, Sony, and more, this mount is perfect for attaching…
