1 / 5
Subaru Forester SG 06-08 Foglight Air Ducts — image 1
1 / 5

Subaru Forester SG 06-08 Foglight Air Ducts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Air ducts to replace the 06, 07, 08 SG subaru forester's factory foglights on the front bumper

Rating
0 / 5
Likes
11
Downloads
36
Makes
0
Views
510
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

This model is a replacement for the stock foglights on 2006, 2007, 2008 SG Subaru Foresters. I made them for my track-ready forester so that I can plumb brake ducting to the front rotors.

These fit into the factory foglight mount points. You'll need to use one panhead screw (or a screw with a washer) where the pre-made hole is. You should even be able to re-use the one you'll have after removing the stock foglights.

Fits 3" air ducting hose.

Print instructions:

  • Mirror the model in your favorite 3d printing model for the opposite side
  • Requires supports (I used tree mode which worked well)
  • I printed in PA6-CF just because. I'm sure ABS or ASA would work perfectly fine, too.

I suspect I may be the only person in the world to want/need/use these--if you happen to use them yourself, leave a comment so I feel better about not being the only crazy person racing a Forester XT as a track car.

Tags