Proxmark3 Easy Slim Case - Improved Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly improved @MakenModify_170962's Proxmark3 Easy Slim Case design. The side button can now be pressed and more!
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 117
- Makes
- 1
- Views
- 435
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- GNU General Public License v3.0
I slightly modified @MakenModify_170962's Proxmark3 Easy Slim Case to fix a few minor problems I have with it, full changelog below. The biggest improvement I have made is to enlarge the cutout for the side button so you can actually press it with a finger! Just like the original, you will need 2x M3x8mm (or shorter) screws for the lid. I've also included a Fusion 360 Archive and .STEP files for easily modifying the design in CAD.
Changes:
Enlarged cutout for side button to allow for it to be easily depressed
Improved alignment of side Micro USB Port & Side Button
Enlarged screw hole walls by 1mm to strengthen them and align with screw head diameter.
Thickened some parts of the case slightly to improve rigidity
Added another cross bar to the lid to improve its rigidity
Proxmark3 Easy Firmware:
For more info on how I setup my Proxmark3 Easy, compile and flash firmware, keep track of flashed versions, and easy auto install and launch scripts, check out my jwidess/proxmark3easy-tools GitHub repo here: https://github.com/jwidess/proxmark3easy-tools