1 / 3
Toyota Prius Gen 2 Key Fob Button Repair — image 1
1 / 3

Toyota Prius Gen 2 Key Fob Button Repair

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This model replaces the rubber button cover on the Toyota Prius Gen 2 (2004-2009) key fob. Print in TPU. STEP included.

Rating
0 / 5
Likes
3
Downloads
50
Makes
1
Views
263
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

Description:

This design for the Toyota Prius Gen 2 key fob cover includes the panic button on the front of the fob that most 3-button versions include. Tolerances and geometry of the original model have been completely redesigned for better fitment. This replacement cover is compatible with the Gen 2 Prius key fob, Toyota part #89994-47061.

Print Settings:

  • TPU/FLEX filament required! PLA and PETG will NOT work.
  • Layer Height: 0.15-0.2mm
  • 3x Perimeters recommended for durability.
  • 100% infill.
  • Print model as oriented in the STL, with the button symbols face-down.
  • No supports.

Assembly Instructions:

  • Remove and clean any remaining rubber from the key fob buttons/housing.
    • Be careful not to damage internal electronics!
  • Prepare for gluing: use isopropyl alcohol to clean any dust and grim from the plastic button housing.
  • Test fit before gluing! Verify fitment is tight/printer calibration is accurate.
  • Apply a moderate amount of cyanoacrylate (CA/superglue) around the perimeter of the key fob button housing.
  • Install the TPU replacement cover correctly oriented and hold down/tape down the edges to ensure a tight fit as the glue sets.
  • Optional: paint in the button symbols for higher contrast (see below), or get fancy with multicolored printing.

Tags