1 / 1
Bed Level Correction - X1 and P1S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bed level correction for a bambu lab X1 and a P1 printer.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 1
- Views
- 135
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — NoDerivatives
With this model, you can test the printing accuracy and adhesion to the plate. If you want to get the best results, you can clean the plates so that they adhere well. The test can be printed with any material.
I used it with Lithophane PLA from Bambu Lab. The test can also be used with other printers of the same size.
If the squares are not the same size after printing, do not adhere, or other problems arise, you can do the following.
- Calibrate
- Check the Motors
- Check bed leveling
If you have a different version for a different printer, please let me know!