Fixed bracket for flexible phone arm with gripper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is fixed bracket to hold a generic flexible phone arm with a gripper. The arm has a diameter of 9,9mm.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is fixed bracket to hold a generic flexible phone arm with a gripper. These arms usually come with a suction cup to mount them on a windshield in a car. The arm itself is a thick wire with a plastic coating that can be bend in the position you want the phone to be. By arm broke out of the suction cup and got unusable. I then designed this bracket to fit the arm so I can mount it at my desk and hold a phone for video calls.
The bracket fits arms with diameter of 9,9mm and achieves a light press fit. Additionally zip ties (max. 5mm wide and 0,5mm thick) can be used to hold the arm in place. The bracket as as 90° hole at the end to support the torque from the phone holder, see images for details. The whole bracket gets screwed down with up to 4 screws through the center.
Assembly:
- Bend the end of your arm sharply to 90°
- Insert arm in to bracket.
- If press fit is not enough use zip ties.
- Screw down bracket in desired place.
Print instructions:
- No supports needed
- Recommended layer height 0,2 mm
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.