GM328 Transistor-tester battery holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure/battery holder for the GM328 transistor tester.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 64
- Makes
- 0
- Views
- 719
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
An enclosure/battery holder for the GM328 transistor tester. The box has a simple hinge that holds the battery in place under the tester, while leaving the board surface perfectly flush on the enclosure's rounded edge. This leaves all the features of the tester easily accessible, such as the sop contacts.
The enclosure is a tight fit around the pcb (<0.1mm gap). Push firmly the pcb until it snaps into place. M3 screws can be directly fastened on the support.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.15mm
Infill:
30%
Notes:
Be sure to inspect the infill for connection from the walls to the screw holes. At least two intersecting walls are required to build a sturdy mount. Increase infill if necessary.