1 / 1
1/4" & 1/2" Magnet Socket Clips for Ernst Socket System
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnet add-on clips for Ernst socket rails. 1/4 and 1/2 inch drive size.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 35
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The modeled dimensions are:
- 1/4" - 0.245" stud
- magnet holes modeled: 3.25mm diameter, thru hole
- magnets actual: 2.98mm diameter, 3.02mm long
- 1/2" - 0.495" stud
- magnet holes modeled: 6.2mm diameter, 3mm depth
- magnets actual: 5.98mm diameter, 2.75mm long
Print settings make a big difference in fit with these. They may require a little trial and error in terms of slicer settings, but they use very little filament …
I sized the magnet holes for press fit without using any glue. If you have different size magnets, let me know. If yours are just slightly different and end up loose, a drop or two of glue usually works very well.
Shown are the ones I printed in PLA with a 0.6mm nozzle, 0.24mm layers. I recommend PETG or ABS/ASA over PLA.