Qidi Q1 Beacon/ Cartographer mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Qidi Q1 Beacon or Cartographer mount
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 21
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Qidi Q1 Pro mount for Beacon or Cartographer bed probe
BOM:
IMPORTANT!
2X M3 12mm or 14mm for replacing the adapter stock mounting screws
thanks to @Rob_3446552 for pointing this out
2 x M2.5 25mm machine screws and nuts (I used socket head) to hold all pieces together
2 x M3 nuts for the backside mounting of the short M3 4mm screws that are packed with Beacon or Cartographer purchase
1 x M2.5 18mm machine screw to replace fan arch mount point
Print with temp resistant filament ABS or above I used ASA-CF with 3 walls and 55% infill
Qidi Q1 Pro offset value for Cartographer or Beacon config files X 14 Y 15.8
It is modeled to place the bottom edge of the sensor 2.75 mm above the stock Q1 pro hardened steel nozzle. If other mods or nozzles are used the model will need to be edited with the Fusion file provided.
The mid-section can be replaced with 15mm standoffs (possibly nylon or aluminum), but I would advise against brass or steel because of weight