Prusa MK4 MK4S PSU Tool Holder and Box With or Without Light Bar Wiring and Switch Solutions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combination Tool box and tool holder. One option has a holder for a lightbar switch and wiring containment.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 148
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
************UPDATED 12/25***********
They were too tall and caused potential X-axis calibration issues. It happened to me when I was testing and fixing collision issues with the bearing filament holder I have. When I tried to calibrate the X-axis with the Z-axis at the top there was an error because the X-axis collided with the toolbox and didn't travel its full distance. I imagine it you never try the calibration with the Z-axis at it's full height it wouldn't ever be a problem. But, I fixed it anyway.
*************************************************************
I loved both designs, so I just combined them. Then I added the channels for the wire of my LED lightbar (Amazon link. Not compensated, just FYI). I also added the holder to put the light switch in and holes for the wire ties.
I had trouble with the corner by the side channel lifting off the bed. I recommend using a brim if you print the one with the switch holder.
The first picture shows the extra hole that I use for the USB-C to USB adapter. The next to the last picture shows the wire channel. The last picture shows the cavity in the back wall to stuff the wire in.
There is also a version without the light switch holder or any of the wire channels.