Creality K1 Lid Riser Bolted FIXED SIZING
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Using Alexander Turtsevitch CAD model, I edited the riser to fit better.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I have edited the CAD files to size the parts correctly. There's around 2mm tolerance now, means 1mm either end. You will still need to print dimensionally accurate.
Also, I've made the holes larger for the heat inserts as they were very small and caused issues when inserting, I used 3mm long, OD 5mm heat inserts and made bolt holes deep as possible as 6mm bolts were at my disposal. Additionally. the holes are now centred as well.
Finally, the back wall, the section that fills in the area of the lid where its slotted, I've made this more snug.