1 / 6
H1+ Muzi.Works Horizantal Charging Stand / Holder v2.2 — image 1
1 / 6

H1+ Muzi.Works Horizantal Charging Stand / Holder v2.2

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Horizontal charging stand for the H1+ Heltec case that can fit a 3k mha battery. Fit might be to snug.

Rating
0 / 5
Likes
1
Downloads
7
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

Stand works with the H1+ case and is meant for Horizontal storage and charging.

I would recommend printing with support for 65 degree plus.    This helps support the rounded underside.     Standard Infill and walls.

V2.2 might be a little to snug a fit.    V2.1 may be a better option if you like a looser fit.

I created this to hold my Meshtastic node on my desk at work so it could be read normally.

Cable pass-through holes on the bottom of the holder are a little small. Should work if you have a skinny cable. 


Tags