Universal Power Strip Wall Mount / Under-Desk Clamps (3mm Screw)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clear your desk space and mount any standard power strip securely to walls, desks, or furniture!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 26
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This clean and minimalistic design consists of two end clamps that slide onto each side of a standard power strip. By securing the ends instead of the middle, it provides a rock-solid hold that won't flex or wobble when you plug or unplug heavy adapters.
🛠 Hardware Required
Screws: 4x Self-tapping screws (3mm diameter, 2 for each side piece).
📐 Print Settings
This model is designed to be highly functional and extremely easy to print. No supports required!
Supports: No (Print flat on its base).
Material: PLA, PETG, or ABS/ASA (PETG recommended if it's going to hold heavy power bricks or be under constant tension).
Layer Height: 0.20mm - 0.24mm (standard settings work perfectly).
Infill: 20% - 30% (Grid or Gyroid).
Perimeters (Walls): 3 or 4 (Crucial to give the screw holes enough strength to resist the clamping force).
💡 Installation Instructions
Slide the two printed pieces onto both ends of your power strip.
Hold the power strip against the surface (wall, under-desk, or cabinet) where you want to mount it.
Mark the screw holes with a pencil.
Screw the pieces into place using the 3mm self-tapping screws.
Tip: You can screw one side completely, slide the power strip in, and then secure the second side for a perfect, tight fit.
This clean and minimalistic design consists of two end clamps that slide onto each side of a standard power strip. By securing the ends instead of the middle, it provides a rock-solid hold that won't flex or wobble when you plug or unplug heavy adapters.
🛠 Hardware Required
Screws: 4x Self-tapping screws (3mm diameter, 2 for each side piece).
📐 Print Settings
This model is designed to be highly functional and extremely easy to print. No supports required!
Supports: No (Print flat on its base).
Material: PLA, PETG, or ABS/ASA (PETG recommended if it's going to hold heavy power bricks or be under constant tension).
Layer Height: 0.20mm - 0.24mm (standard settings work perfectly).
Infill: 20% - 30% (Grid or Gyroid).
Perimeters (Walls): 3 or 4 (Crucial to give the screw holes enough strength to resist the clamping force).
💡 Installation Instructions
Slide the two printed pieces onto both ends of your power strip.
Hold the power strip against the surface (wall, under-desk, or cabinet) where you want to mount it.
Mark the screw holes with a pencil.
Screw the pieces into place using the 3mm self-tapping screws.
Tip: You can screw one side completely, slide the power strip in, and then secure the second side for a perfect, tight fit.
This clean and minimalistic design consists of two end clamps that slide onto each side of a standard power strip. By securing the ends instead of the middle, it provides a rock-solid hold that won't flex or wobble when you plug or unplug heavy adapters.
🛠 Hardware Required
Screws: 4x Self-tapping screws (3mm diameter, 2 for each side piece).
📐 Print Settings
This model is designed to be highly functional and extremely easy to print. No supports required!
Supports: No (Print flat on its base).
Material: PLA, PETG, or ABS/ASA (PETG recommended if it's going to hold heavy power bricks or be under constant tension).
Layer Height: 0.20mm - 0.24mm (standard settings work perfectly).
Infill: 20% - 30% (Grid or Gyroid).
Perimeters (Walls): 3 or 4 (Crucial to give the screw holes enough strength to resist the clamping force).
💡 Installation Instructions
Slide the two printed pieces onto both ends of your power strip.
Hold the power strip against the surface (wall, under-desk, or cabinet) where you want to mount it.
Mark the screw holes with a pencil.
Screw the pieces into place using the 3mm self-tapping screws.
Tip: You can screw one side completely, slide the power strip in, and then secure the second side for a perfect, tight fit.