1 / 9
4 button Switchbox for home automation Home Assistant
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Springloaded very easy to print 4 button box. ESP32 plus code.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Print at 0.2 mm, 15% infill no supports. Print the top at 100% infill.
Connect all buttons at one side to ground, otherside to a GPIO pin (see provided code) on the ESP32. Connect one pin of the LED to ground and the other to a GPIO pin. Thats it. Use m3 bolds to screw the lid on. For this project I used ESP32 mini d1 and a standard 7mm pushbutton from Amazon. The extra LED swithes on for a second when you press a button.
p.s.
First you have to make the ESP available in Home Assistant with ESP Home, than add the provided code.