1 / 2
Aluminium Profile End Cap (160mm x 18mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of an end cap for an aluminium 160mm by 18mm open extrusion/profile. Widely used for LED lamps.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an end cap for aluminium 160 mm x 18 mm open profile widely used for DIY aquarium and plant lights.
Please like the model if you found it helpful! :)
The dimensions:
160 mm length
18 mm width
15 mm depth (flat part + pins)
Printing instructions
more perimeters for more rigid print
higher infill values (less likely to break when pulling off the profile)
lay on the flat side to print
layer height doesn't matter much (0.2 mm for me)
0.4mm nozzle
print without support
no brim
use heat resistant filament if you plan to use for lighting