1 / 2
Aluminium Profile End Cap (160mm x 18mm) — zdjęcie 1
1 / 2

Aluminium Profile End Cap (160mm x 18mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model of an end cap for an aluminium 160mm by 18mm open extrusion/profile. Widely used for LED lamps.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an end cap for aluminium 160 mm x 18 mm open profile widely used for DIY aquarium and plant lights.

Please like the model if you found it helpful! :)

The dimensions:

  • 160 mm length

  • 18 mm width

  • 15 mm depth (flat part + pins)

Printing instructions

  • more perimeters for more rigid print

  • higher infill values (less likely to break when pulling off the profile)

  • lay on the flat side to print

  • layer height doesn't matter much (0.2 mm for me)

  • 0.4mm nozzle

  • print without support

  • no brim

  • use heat resistant filament if you plan to use for lighting

Tagi