ESP32-S3 camera mount for P1S door
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount for BambuLab P1S front door using DFROBOT DFR1154
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 26
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I was always disappointed with the built-in camera of the BambuLab P1S printer. A framerate of 1s is not very satisfying.
When I found the DFROBOT ESP32-S3 AI camera I decided that it could be a good choice for a live-streaming camera.
Inspired by Breefube's camera enclosure, I designed a bracket for the DFROBOT camera for the front door of the P1S front door.
As firmware for the camera I used the example provided by DFROBOT on their Github repo for a WebCam using the ESP32-S3 AI camera. It does stream the video over WiFi on port 21:
I printed it in ABS, because I am using ABS a lot in my projects and a my first experience when printing it in PLA was that over time the bracket deformed easily, as the glass can get quite hot when printing with 240 C nozzle and 90 C print plate temperatures.
Required parts beside of the 3D printed mounting bracket and lid:
DFROBOT ESP32-S3 AI Camera Module
4 self tapping screws ⌀2mm max 6mm length
Firmware provided by DFROBOT DFR1154_Examples 5.3 CameraWebServer
For the mounting, the original screws of the glass door handle are used.
For details see the provided assembly document.