MX‑G System – Sprinkler Extension with Adjustable Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable MX‑G sprinkler head with M5 thread for Festo QSM‑M5 fittings and even watering.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model is an MX‑G System Sprinkler Extension designed for easy integration into modular setups.
It includes an M5 internal thread compatible with Festo QSM‑M5 pneumatic couplings or any similar push‑in connector.
The design provides even water distribution, making it ideal for Living Soil beds, raised garden beds, or controlled irrigation systems.
The included Extension Arm increases adjustability and reach, enabling precise positioning of the sprinkler head.
Assembly Instructions
You will need the following additional hardware:
1× Festo QSM‑M5 coupling (or equivalent M5 push‑in fitting)
2× M3 nuts
2× M3 × 16 mm DIN912 socket head screws
Steps:
Print all parts in given direction
Insert the M3 nuts into the hexagonal recesses on the arm and clamp parts.
Connect the main body and extension arm using the two M3×16 screws.
Screw the Festo QSM‑M5 fitting into the M5 threaded port.
Attach your water or air line to the fitting and adjust the angle as needed.
The remix was created with the original designer’s permission.