1 / 5
ID Badge Card Holder Gripper Clamp for Lanyard Reel or Clip -- NO HOLES NEEDED -- by Upton O'Goode — image 1
1 / 5

ID Badge Card Holder Gripper Clamp for Lanyard Reel or Clip -- NO HOLES NEEDED -- by Upton O'Goode

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ID badge gripper clamp clip holder - secure your card without punching a hole! For cruise, work, dorm, gym, conference

Rating
0 / 5
Likes
9
Downloads
49
Makes
0
Views
331
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial

Don't punch a hole in your card - you might kill it!

Smart cards, RFID badges, and cruise ship keycards have antennas and chips inside. Punch a hole in the wrong spot and they stop working.  A new card can cost you $20, $50, or even more, not to mention inconvenience and time.

Bulky badge holders? Even worse.

With other card holders, you can't swipe, insert or tap.

This gripper clamp holds your card from the edge - portrait or landscape.

  • Easy-on

  • TPU / flex teeth securely grip your card without damage

  • Hard plastic body securely attaches to lanyard, reel, clip, or keyring

  • Card stays fully exposed

  • Swipe, tap, insert - no fumbling

  • Works every time

The best for:

  • Cruise cards

  • Work badges

  • Hotel key cards

  • Dorm IDs

  • Gym IDs

  • CAC cards

Why print your own?

  • Ready tonight

  • Pick your colors

  • No 20-pack when you just need two

Caution / Warning:

This print may make you irresistably attractive.

Two-material print:

Rigid body (PETG or PC blend) with TPU gripping surfaces for secure hold without scratching or slipping.

Print settings:

  • I printed the one in the pics on a Prusa XL 5-tool with 0.6mm nozzle, 0.15mm structural, using stock settings for Overture PETG and Overture High Speed TPU

    • I had the filament on hand and loaded into those nozzles, first try worked OK without tweaking

  • No supports, skirt, brim needed

  • Optimize for your own printer, nozzle, and filament

Tips:

  • I first tried printed as a standard multimaterial print, but TPU stringing left hairs embedded in the PETG - looked rough.

  • Switching to sequential printing (PETG first, then TPU) solved this and saves material by eliminating the wipe tower.

  • You'll have to figure out how to disable the wipe tower in PrusaSlicer or you'll get an "invalid data" error.

  • You'll also need to choose to set bed temperature to the PETG setting.

Single-tool printers: Print each part separately, one at a time.

Final Assembly:

  • Slide the TPU / flex teeth part into the hard plastic part

  • You may need to activate the slot by cutting with a sharp blade to open the teeth. BE CAREFUL!

Please post a pic of how you use yours!

Tags