Space Racers - Precision shooter + 2x space ships
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shoots the space racers with stepless precision. Use this when you are near the finish line, or if space is limited.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 29
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Love a quick print and a fun race? These small racing spaceships are under 3 cm (1.18 inches), and the included precision shooter can launch them up to 4 meters (13 feet) on a flat, smooth surface. The long range shooter can get you up to 10 meters (33 feet).
Use the precision, short-range, and long-range shooters to build a track with whatever you have, and let the race begin. For example, a book can add an interesting angle to navigate, and a pair of cups can serve as the finish line. Remember to try to bump your competitors away.
This package includes the high-precision spaceship shooter. You have full control over how far the spaceships will fly, though the range is not extreme. Unlike traditional long- or short-range shooters, this one uses a rubber band to add traction, making the flight controlled and satisfying.
In this package
Precision shooter
Space ship one
Spaceship two
Printing the space ships
The shooter is print-in-place and requires no supports. For extra strength, print it with 4 walls/perimeters.
The spaceships also require no supports. You do not need AMS or MMS for the color swap—just add a color change in your slicer.
How to do a color change in Prusa slicer
Needed parts, beside filament
Optional 3x 4.76mm (3/16") steel balls per space ship. These make the spaceships slide very well. They are optional, but more fun to use.
1 standard rubber band
How to assemble the space ships
Place one steel ball on the table at a time
Press-fit it into the base of the spaceship
Printing the shooter
This is an fairly easy print. But there is a long bridge. I think most printers will handle it well. If not, you will need to add support.
A lot of infill is not needed, but the shooter will be stronger if you set the perimeter/walls to 3-4.
How to assemble the shooter
Attach the rubber band to the left arm
Move the rubber band through the holes behind the shooting arm
Attach the rubber band to the right arm
How to fire
Place the shooter on a flat, smooth surface
Fit a space ship to the front of the shooting arm
While firmly holding the shooter, carefully drag the arm as far back as you want
Slip the arm, and the ship will fire away
Simple game rules
The game is turn based
You are always allowed to move an obstacle, to be able to shoot
The obstacle must be put back at the approximately same location
The one who crosses the finish line first is the winner
Each player must have the same amount of turns - If first player crosses the line before the second player, the second player has one more turn
If all players crosses the finish line at the same time, the one who got farthest is the winner
You may do a variant where it is not allowed to move any obstacle. Then you just have to shoot your way back to the track.
Long Range shooter
Shoots a very long distance. Maybe around 10 meters (33 feet).
Get the long range shooter and the space ships here
Short Range shooter
Get this, when you do not need to shoot that far. The space ship will still fly around 5 meters (16 feet).
Get the short range shooter here
Precision shooter (Included)
This acts both like a golf putter and a powerful shooter. Use this when you need great control on how far the spaceship should go. The precision shoot has a great range of around 10 centimeters to 4 meters, on a flat surface.
Notes
This is meant to be shot at a flat surface. Does not work well in the air.
This is not a toy for small children. It does shoot quite aggressively!