1 / 3
MTG Tower Deck Box | Double Slot Storage for Large Libraries
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This custom-designed deck box is built specifically for the Tower Deck MTG format
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 59
- Makes
- 0
- Views
- 357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Material: PLA, PETG, or PLA+ recommended for durability.
Nozzle: 0.4 mm or 0.6 mm.
Layer Height: 0.20 mm (Quality) or 0.24 mm (Draft).
Infill: 15-20% Grid or Gyroid (sufficient for strength).
Perimeters (Walls): 3 perimeters recommended for sturdiness.
Supports: Minimal supports might be needed for the sliding rails depending on your printer's bridging capability. Place the box on its bottom and the lids flat on the bed.
Orientation: Print the main body standing up (bottom on the plate) and lids flat.
(Konec anglického textu)