1 / 3
Elegoo Centauri Carbon Exhaust Vent / 100mm Duct Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter that attaches over both fans going to a 100mm duct, can exhaust to the left or right
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 121
- Makes
- 0
- Views
- 697
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mounts to the back of the printer using 3x M3x10 screws and connects to a 100mm vent hose with a simple hose clamp
Prints in 2 parts, so the exhaust can be directed either left or right and then glued in place using CA glue (superglue)
Covers both fans, resulting in the aux fan recirculating the exhaust air.
Printed in PETG-GF (any material will do, it's what I had on hand)
Duct adapter:
0.12mm layer height
4 walls (ends up being solid)
Supports enabled - Tree, Organic
Bracket:
0.2mm layer height
4 walls
Support off