Heltec Wifi LoRa 32 Cases (v3/v4) with environmental sensor (BME280)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Collection of cases for the Heltec WiFi LoRa 32 (v3 and v4) with multiple battery sizes and optional BME280 sensor.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is a collection of cases for the Heltec WiFi LoRa 32 v3/v4 boards. It holds the board, a battery, and optionally an environmental sensor. The button (PRG) can be pressed and the reset button (RST) is accessible via a pinhole (use a toothpick). You can hang the device on the wall.
If you have a battery or sensor that is not currently supported, or if you have other requirements (for instance: different or no hardware) reach out and I'll see what I can do. The cases were tested with Heltec V4, should work with V3, and might work with older models.
Print and assembly
Download the 3MF, STL or STEP file that suits your needs. File naming: heltec-<battery>-<sensor>. For instance when using a 1200mAh 5.0mm x 30mm x 35mm battery with a BME280 sensor, use heltec-503035-bme280.
Print without supports and ideally use 0.2mm layer height.
Insert 4 M3 heat set inserts (I used CNC Kitchen's) and use 4 countersunk M3 screws.
Reach out if you need help with the wiring. If the battery doesn't go in, don't force it.
