1 / 7
Bang & Olufsen Beolab 2500 wood front bracket — image 1
1 / 7

Bang & Olufsen Beolab 2500 wood front bracket

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Brackets to add wooden fronts to the Bang & Olufsen Beolab 2500 speakers

Rating
0 / 5
Likes
1
Downloads
21
Makes
0
Views
122
Reviews
0

Updated at source:

Model information

Category
Audio
License
Creative Commons — Attribution

Description

While restoring my Beocenter 2500, I wanted to replace the original Beolab speaker fronts with wooden slats for a warmer, more natural look. To achieve this, I designed a 3D-printed PETG bracket that attaches to the original fronts using double-sided tape.

The bracket holds the wooden slats in place by clamping them, so no adhesive is required for most of the slats. This also means the wood can be removed or replaced later if needed.

Only the outer slats are not clamped by the bracket, so I fixed those with a small amount of adhesive.

This design was made for the speakers of the Bang & Olufsen Beolab 2500, which are typically paired with the Bang & Olufsen Beocenter 2500.


Materials

For one pair of speakers you will need:

  • 38 wooden strips

  • Dimensions: 18 × 4 × 330 mm

These dimensions fit perfectly within the clamp system of the bracket.


Assembly

  1. Attach the printed brackets to the original speaker front using double-sided tape.

  2. Insert the wooden slats into the bracket so they are clamped in place.

  3. Apply adhesive only to the outer slats, as they are not held by the clamp.

  4. Repeat for the second speaker.

Each speaker uses 3 brackets, as shown in the photos.


Printing

  • Recommended material: PETG

  • Print orientation: flat on the build plate

  • No special print settings required


Tags