ESP32 Case - C6, C3, S3 including different lids and bases
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32 Case for different ESP32 Mini Boards (C6, C3, S3), different lids and different bases, onshape for modifications
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 124
- Makes
- 0
- Views
- 696
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Cases for different ESP32 boards
Seeed XIAO ESP32 C6 (21 x 17.8 x 1.35 mm)
Waveshare ESP32 S3 Zero (24 x 18 x 1.7 mm)
ESP32 C3 SuperMini (23 x 18.2 x 0.8 mm)
No screws required, the lid is fixed by friction
Different openings for ventilation and pins
Tested and used with PETG, PLA not tested
If you need other dimensions, just use onshape (Link to project is: Project). You only have to change the first three variables in the dimensions tab for other board dimensions. For the different cases and lids change the configuration (most top in project tree). If you are not used to onshape and in need of other dimensions just write a PM.