HOTAS Warthog Desk Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
allows you to store your Warthog HOTAS under your desk and deploy it extremely quickly
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 62
- Makes
- 0
- Views
- 501
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Public Domain
Assembly Notes
To assemble this mount, you will need a few additional parts:
16 × M5 screws, ideally around 40 mm long
x16 M5 SCREW 50 MM LONG
x16 screw 2.5 mm placo screws
x8 WOOD SCREW (for the fixation under your desk )
X4 tension spring ( 50MM MAXIMUM)
The support arm is designed to fit on all desk
The support arm shown in the photos must be printed on its side, exactly as shown in the preview.
This orientation is important to ensure the best mechanical strength of the part. Printing it in another orientation may place the layer lines in a weaker direction, which could cause the part to break under load.
By printing the part on its side, the layers are aligned in a way that greatly improves resistance to stress and bending, making the mount much stronger and more reliable during use.
still working for more options, if you have any suggestion tell me :)