1 / 4
Sony a6500 offset Vivo monitor mount — image 1
1 / 4

Sony a6500 offset Vivo monitor mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I use an a6500 as my webcam, mounted to the top of the vertical tube (between my 2 monitors) on a Vivo desk mount

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
27
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

I needed an offset mount to set my Sony a6500 back on the top of the Vivo monitor tube, so the monitors could angle inward closer.

It's designed to be printed as it come into your slicer, with the recesses facing upward. No supports are required. 

I used PLA, with 1.8mm walls, floor and ceiling and 20% gyroid infill. Plenty strong, nice tight fit for the 1/4" 20 bolt, but the hex head I had on hand was only 10mm, and the recess is 14mm

Tags