Spool Middle Attachment for Core One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool attachment designed for the arbor (middle) of the spool to fit better on the Prusa Core One arm
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
This is designed for the Prusa Core One and spools with large middle holes (arbors), this one specifically made for Giant Arm filament (but will work with any filament that uses this exact same widely manufactured spool). Without the attachment, the spool hangs down low and touches the printer (see picture); I don't like this sloppy look.
The outside diameter is 75.35mm and should slide just perfect into the spool arbor; the inside diameter is 47.8mm and leaves just enough room to fit around the Core One's arm.
Tinkercad was used to make this.