1 / 3
Ryobi 40V / Kobalt 40V Electric Blower & Trimmer Wall Hanger — Reinforced Base (PETG) — image 1
1 / 3

Ryobi 40V / Kobalt 40V Electric Blower & Trimmer Wall Hanger — Reinforced Base (PETG)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Reinforced wall hanger for 40V Ryobi & Kobalt KHB-3040-06/KST-120X-06. Base is ~2× thicker than the original.

Rating
4 / 5
Likes
11
Downloads
52
Makes
0
Views
262
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a reinforced remix of the original Ryobi 40V blower wall hanger. While testing the original design, I discovered it also fits the Kobalt KHB-3040-06 electric blower and Kobalt KST-120X-06 trimmer — great news if you run a mixed-brand tool setup. The key change in this remix is a base that's roughly twice as thick as the original, addressing the weak point people may encounter when the hanger is bearing the full weight of the tool day in and day out. Printed in PETG with aggressive perimeter and infill settings, this version is built to hold up for seasons of garage and shed use.


Print Settings

Setting

Value

Material

PETG

Perimeters

6

Infill

80% — Gyroid

Filament Used

~39g

Estimated Print Time

~2 hours

Supports

Not required

Orientation

Upright


Build Instructions

  1. Slice upright — no supports needed despite the vertical orientation. This is the recommended orientation as it aligns the layer lines along the length of the hook, maximizing resistance to the bending and shear forces the hook experiences when bearing the weight of the tool.

  2. Use the print settings above — the 6-perimeter / 80% Gyroid combination paired with the upright orientation gives this hanger exceptional strength where it matters most.

  3. PETG is strongly recommended — it handles sustained load stress, temperature fluctuations in a garage or shed, and minor UV exposure far better than PLA. ASA or ABS are acceptable alternatives.

  4. Mounting — secure to a stud or use appropriate wall anchors rated for the weight of your tool. The hanger itself is strong; make sure your wall fasteners are too.


Tips

  • Printing upright without supports is achievable thanks to the geometry of the design — trust the orientation and don't add supports, as they're unnecessary and may affect surface quality on the hook.

  • If your first layer adhesion is inconsistent, slow down your first layer speed slightly — PETG can be finicky on textured PEI surfaces at high speed.

  • Mount at a height that keeps the tool clear of the floor but still easy to lift on and off without straining.

  • Works on both the blower and trimmer from Kobalt, but double-check your tool's collar shape if you have a newer model revision, as Kobalt has made minor tooling changes across production runs.

  • Print in a bright color so it's easy to see at a glance whether the tool is on the wall or out in the yard.

Tags