HS720G Smart Battery Box / Box chytré baterie HS720G
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EN Replacement box for HS720G smart battery. CZ Náhradní box pro chytrou baterii HS720G.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
EN HS720G Smart Battery Box
Replacement battery box for the Holy Stone HS720G smart battery.
This model can be used either as a replacement for the original battery housing or for adapting other compatible batteries that use the same electronics but have different connector placement.
Important
The box is assembled using 4x M3 screws with round hex socket heads.
For the status LED indicators, it is recommended to insert short pieces of transparent filament into the prepared holes. The holes are sized for standard filament diameter.
The electronics board is visible through these light guides, so the battery status LEDs remain readable.
Compatibility
Designed for the smart battery electronics used in the Holy Stone HS720G battery.
It can also be useful for other compatible battery packs if they use the same internal electronics, but have different connector positions.
Please verify fit and connector placement before final assembly.
Recommended print settings
Material: PETG recommended
PLA: possible, but PETG is preferred for better durability
Layer height: 0.20 mm
Perimeters: 2–3
Infill: 15–30 %
Supports: depending on part and orientation, some parts may require supports
Print orientation: print the parts in the provided orientation if possible
Assembly
Print the individual parts and transfer the original electronics into the new box.
The housing is secured with 4x M3 screws with round hex socket heads.
Insert short pieces of transparent filament into the LED holes if you want to preserve clear visibility of the battery status indicators.
Notes
STEP files include both the individual parts and the complete assembly.
An assembly video will be added later, but it is not available yet.
Box chytré baterie HS720G
Náhradní box pro chytrou baterii dronu Holy Stone HS720G.
Model lze použít buď jako náhradu původního obalu baterie, nebo pro úpravu jiných kompatibilních baterií, které používají stejnou elektroniku, ale mají jiné umístění konektorů.
Důležité
Box se sestavuje pomocí 4x šroubů M3 s kulatou imbusovou hlavou.
Pro zobrazení stavových LED je vhodné vložit do připravených otvorů krátké kousky transparentního filamentu. Otvory jsou navrženy pro standardní průměr filamentu.
Elektronika pak zůstane čitelná přes tyto světelné vodiče a stavové diody budou dobře viditelné.
Kompatibilita
Určeno pro elektroniku chytré baterie používanou v baterii pro Holy Stone HS720G.
Lze využít i pro jiné kompatibilní baterie, pokud používají stejnou vnitřní elektroniku, ale mají odlišné umístění konektorů.
Před finální montáží doporučuji ověřit usazení dílů i polohu konektorů.
Doporučené nastavení tisku
Materiál: doporučeno PETG
PLA: možné, ale PETG je vhodnější pro vyšší odolnost
Výška vrstvy: 0,20 mm
Perimetry: 2–3
Výplň: 15–30 %
Podpěry: podle orientace dílu mohou být některé potřeba
Orientace tisku: pokud možno tisknout v dodané orientaci
Montáž
Vytiskněte jednotlivé díly a přesuňte původní elektroniku do nového boxu.
Krabička se spojí 4x šrouby M3 s kulatou imbusovou hlavou.
Pokud chcete zachovat dobrou viditelnost stavových LED, vložte do otvorů krátké kusy transparentního filamentu.
Poznámky
STL soubory obsahují jednotlivé díly i kompletní sestavu.
Montážní video bude doplněno později, zatím není k dispozici.