Vivo Tray Arm Clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.56 – €0.68 net (excluding VAT)
For file: vivo_tray-arm_clip_stand-V101L_0.4n_0.15mm_PETG_COREONE_43m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 43.2 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Vivo Laptop Stand-V101L Tray Arm Clip
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
After scouring the innerwebz for a repair part, again, without luck, I took the last good one I had, my digital calipers, and went to town.
I have the Stand-V101L, but I believe this clip will work on other models.
This is my first model I've posted, ever. So please bear with me.
I would recommend ABS or ASA but PETG will work, if you print the clip on edge with supports "Everywhere". If your print it flat with the legs in the Z axis, they will snap.
I used the Prusa Core One 0.4 nozzle, at 0.15mm STRUCTURAL setting in Prusaslicer.
Snug Rectilinear Supports at 50%. 100% infill.
I tried to print the barbs at a depth of 3.25mm, but my machine printed them at 3.5mm. A tight fit, but they will work.
Feel free to reach out if I missed anything!